Furnace Repair in Palatine, IL
Palatine runs from older houses near the Metra station to 1960s ranches and larger two-story homes on the north side near Inverness. The diagnostic is $75 ($99 evenings, weekends and holidays). Most repairs cost $100 to $700, and you approve a flat-rate price before work starts.
456 Google Reviews
Your Peace of Mind
Flexible Options
We're Here Anytime
Guaranteed
Need Furnace Repair in Palatine?
Downtown, the south side townhomes or the north side near Inverness, we cover Palatine ZIPs 60067 and 60074.
- $75 diagnostic ($99 evenings, weekends & holidays)
- 24/7 emergency service, with same-day appointments available
- Trucks stocked with common furnace parts, so most repairs are done in one visit
- Upfront, flat-rate pricing before any work starts
Time for a New Furnace in Palatine?
Is your Palatine high-efficiency furnace 20 years old or more? A Lennox Premier Dealer offers free in-home replacement estimates.
- Good, Better and Best options with upfront pricing
- Nicor Gas rebates applied where you qualify
- Financing available, including 0% APR on select Lennox systems during Lennox promotions
- Sized with a load calculation, installed and permitted
Quick Summary
Pure Comfort Heating and Cooling repairs furnaces in Palatine, IL (60067 and 60074) from our shop in Streamwood. The diagnostic is $75 ($99 evenings, weekends and holidays), most furnace repairs cost $100 to $700, and you approve a flat-rate price before any work starts. Phones are answered 24/7, same-day service is common, and stocked trucks finish most repairs in one visit. Call (708) 515-4822.
Reviewed by Gene Baldassano, owner and NATE- and EPA 608-certified HVAC technician since 2008 · Updated
Common Furnace Problems in Palatine Homes
Palatine has a wide mix of homes: older houses near the downtown and Metra station, large neighborhoods of 1960s and 1970s ranches and split-levels, townhomes and condos in the south, and larger two-story homes on the north side near Inverness. The furnace problems differ with the home, so we test the whole system before quoting a repair.
In the mid-century ranches and split-levels, limited return air and older ductwork cause many overheating and short-cycling calls. In the larger homes, high-efficiency furnaces 20 years old or more, zoning and long duct runs are more common, and inducer motors, control boards and zone parts lead the repairs.
How a Palatine Furnace Repair Visit Works
Palatine homes vary so much that we test the whole system before quoting any repair. In the 1960s and 1970s ranches and split-levels, we often find limited return air and older ductwork behind overheating and short cycling. In the bigger north side homes, we look at zoning, long duct runs and high-efficiency furnaces that are 20 years old or more. The method holds. The thermostat call starts it, and we follow the sequence through ignition. Then come the safeties, electrical parts, venting, drainage and airflow. We measure before replacing parts. You learn the cause and approve a flat-rate price before work begins. Our trucks are stocked with the common parts, so most furnaces are fixed on the first visit. We repair every major brand, including furnaces put in by other companies, and for most brands we handle the manufacturer parts warranty claim so you pay labor only.
Repair or Replace Your Palatine Furnace?
On Palatine’s north side, many high-efficiency furnaces are now 20 years old or more. That is past the typical range: a well-maintained gas furnace lasts about 15 to 20 years in the Chicago area. Still, age alone does not decide it. Use the $5,000 rule. Multiply the furnace’s age by the repair price. Under $5,000, repair usually makes sense. Over $5,000, get a replacement price alongside the repair quote. A cracked heat exchanger is a safety issue at any age. If replacing is the better path, the in-home estimate is free. Nicor Gas rebates apply to qualifying high-efficiency furnaces. Financing is available, including 0% APR on select Lennox systems during Lennox promotions.
Heating Services in Palatine
Related services for Palatine homeowners.
Palatine Furnace Repair Cost and Timing
A typical Palatine furnace repair costs $100 to $700, about $300 on average. Flame sensors, igniters and pressure switches are at the low end. Inducer motors, control boards, blower motors and zoning repairs cost more, and zone parts come up often in the larger north side homes. In the mid-century ranches, airflow is frequently the real fix. You get a written, flat-rate price before work starts.
| Job | Typical window | What changes the number |
|---|---|---|
| Diagnosis | Same day when a truck is open | Scheduling and after-hours demand |
| Furnace repair | Often same day | Smaller parts versus major safety or heat-exchanger work |
| AC repair | Same day to 48 hours | Electrical work versus sealed-system repair |
| Furnace or AC replacement | 1 to 2 install days after equipment arrives | Return-air work, two-story airflow, condenser placement, and installation access |
| Mini split or tankless | Site-specific | Electrical, gas, venting and installation location |
| Tune-up | 60 to 90 minutes | System age, condition and last service |
Diagnosis
Typical window
Same day when a truck is open
What changes it
Furnace repair
Typical window
Often same day
What changes it
AC repair
Typical window
Same day to 48 hours
What changes it
Furnace or AC replacement
Typical window
1 to 2 install days after equipment arrives
What changes it
Mini split or tankless
Typical window
Site-specific
What changes it
Tune-up
Typical window
60 to 90 minutes
What changes it
Why Palatine Homeowners Choose Pure Comfort
In a two-story Palatine home, a warm upstairs is not always a sizing problem. We check duct capacity, return air and controls first.
Local and family-owned
Founded in Streamwood in 2008 and still owned and operated by the family who started it.
In-house technicians
Service and installation completed by our own crews, never subcontracted to another company.
Certified and insured
NATE and EPA Section 608 certified, fully licensed and insured for the work we carry out.
Lennox Premier Dealer
Premier Dealer standing, with service and repair covering all major HVAC makes and models.
Palatine replacement planning covers older in-town homes, two-story airflow and zoning, so the new furnace matches how the house moves air. Where a permit is required, we confirm the current Palatine requirements and pull the permit, or help you file it in towns where the homeowner applies, then schedule any required inspection.
Not Sure Whether to Repair or Replace?
Mid-century ranch running hot, or one zone in a larger home not heating? We will test the system and explain the realistic options for your Palatine home.
Feedback From Homeowners We Serve
Palatine covers older in-town houses, ranches and two-story homes, and every one deserves care. Read recent reviews about how Pure Comfort explains the work, protects the home and finishes the job.
Recent Heating Jobs in Palatine, IL
1 job logged by our technicians in Palatine since October 2026. Locations are shown by town and ZIP code only.
The homeowner heard a rough inducer motor and repeated clicking at startup. We ran the furnace through several cycles and checked the inducer motor, pressure switch, gas valve, ECM blower motor and control board. The pressure switch held during our test, but a struggling inducer motor or a clogged condensate trap and hoses can make it drop out mid-cycle. The furnace is heating for now. We are sending repair options for the inducer motor and will clean the drain trap and hoses on the repair visit.
Recent Palatine installs
Equipment installed by our team in Palatine homes.
What Palatine homeowners say
“Great company Pure Comfort Heating and great technician Jonathan Doss! Saved me thousand of dollars on my air conditioner. Always on time , accurate, professional and trustful ! Highly recommend them For all heating and cooling devices.”
AC repair
“Jose took care of the maintenance of our furnace in a timely and professional manner. Thank you very much.”
Furnace maintenance
When you need HVAC due to an unexpected event you want someone who not only can provide the service you need….
Great service. Very professional. They try all avenues to resolve issues with equipment. Always a pleasure to work….
Had an issue with the thermostat reading erroneously, as soon as I contacted Pure Comfort, they got back….
Our serviceman, Gene, was very responsive, professional and thorough. He explained each aspect of the issue clearly and….
I called them at 7am with no heat, the only available spot they had was in the afternoon, 5 minutes later they called….
Gene was professional, on-time, very friendly and did a thorough job inspecting our A/C unit. He also checked….
Quick and honest service and advice last minute on a Sunday. Clean crew and equipment. Gene was a knowledgeable….
Gene did not give up on the problem. It was a crazy situation but he never gave up found the problem and fixed it. Thank you….
Furnace wasnt working. Called Pure Comfort after hours and they came right out and helped me. The furnace….
Very professional, definitely knowledgeable had the furnace fixed in 10 minutes. I can honestly say I trusted Gene….
Furnace Repair Near Palatine
Pure Comfort repairs furnaces throughout Palatine and the towns around it, including furnace repair in Inverness, furnace repair in Arlington Heights and furnace repair in Schaumburg.
Drive time: our shop in Streamwood is about 14 miles from Palatine, roughly 30 to 35 minutes away in normal traffic.
Zip codes: we cover Palatine homes in 60067 and 60074.
Furnace repair in nearby towns
- Arlington HeightsFurnace repair
- InvernessFurnace repair
- South BarringtonFurnace repair
- Hoffman EstatesFurnace repair
- SchaumburgFurnace repair
Near Palatine but not listed? We serve towns within about 20 miles of Streamwood. See all service areas or call (708) 515-4822.
Palatine Furnace Repair FAQs
How much does furnace repair cost in Palatine?
The diagnostic is $75, or $99 evenings, weekends and holidays. Most furnace repairs cost $100 to $700, and about $300 is typical. You approve a flat-rate price before any work starts.
How fast can you get to Palatine?
Our Streamwood shop is about 14 miles from Palatine, roughly 30 to 35 minutes in normal traffic. We answer 24/7 and offer same-day furnace repair when a truck is open.
Only one floor of my zoned home is getting heat. Is the furnace broken?
Not always. A stuck zone damper, a failed zone board or a thermostat problem can leave one floor cold while the furnace runs normally. We test the zoning system along with the furnace.
My condo furnace is in a small closet. Can you work on it?
Yes. We check combustion air, return air and venting along with the furnace, since a tight closet can be part of the problem.
Should I repair a 20-year-old furnace?
Use the $5,000 rule: multiply the furnace’s age by the repair price. Under $5,000, repairing usually makes sense. Over $5,000, it is worth getting a replacement price too. A cracked heat exchanger usually means replacement.
Do you repair furnace brands other than Lennox?
Yes. Pure Comfort is a Lennox Premier Dealer, but we repair all major furnace brands in Palatine, including furnaces installed by other companies.
Schedule Furnace Repair in Palatine
Phones are answered 24/7 for Palatine homes. Call or book online, and our Streamwood team, about 14 miles away, will diagnose the problem and price it first.
- You get a scheduled window and the technician's name
- We diagnose and price the work before anything starts
- Replacement estimates are free, with no obligation
Call rather than using the form: (708) 515-4822. Forms are checked during business hours, so a phone call gets you a faster answer.
Schedule HVAC Service
Licensed, certified and accredited
- Lennox Premier Dealer
- NATE-certified technicians
- EPA Section 608 certified
- BBB Accredited Business
- Licensed business in the Village of Streamwood
- Registered Illinois LLC
- Fully insured