Power-Vent Water Heater Installation in the Northwest & West Suburbs
Choose power-vent water heater installation in Streamwood, IL when household demand, vent routing, available space and electrical access support this type of tank system for your home.
456 Google Reviews
Your Peace of Mind
Flexible Options
We're Here Anytime
Guaranteed
Power-Vent Water Heater Pricing
| Water heater | Typical installed price |
|---|---|
| 40-gallon power vent | $3,200 – $3,800 |
| 50-gallon power vent | $3,500 – $4,000 |
| 75-gallon power vent | $4,200 – $5,200 |
What moves the price
- Replacing an existing power vent or running new vent pipe
- Brand
- Slim, tall or short tank
- Drain pan
- New ¾" main shut-off valve
- Gas piping
- Copper or galvanized water lines
What every power-vent installation includes
- New Bradford White power-vent water heater with a 6-year manufacturer parts warranty
- Removal and proper disposal of the old water heater
- New dielectric unions to protect the plumbing from corrosion
- New temperature and pressure (T&P) relief valve
- T&P discharge piping installed or reconnected to plumbing code
- Gas piping reconnected, with a new gas shut-off valve if required
- Vent piping reconnected or replaced as needed
- Hot and cold water lines reconnected
- New drain pan if the location requires one
- Fill, purge air and test for proper operation
- Blower and combustion venting verified
- Leak test of all water and gas connections
- Full startup and safety check
Warranty
- 6-year manufacturer warranty on parts
- 1-year labor warranty from Pure Comfort Heating & Cooling
Typical installed prices in our service area. You get a written price before any work starts.
No Hot Water?
Fast, honest water heater repair from a family-owned Streamwood team.
- $75 diagnostic ($99 evenings, weekends & holidays)
- 24/7 emergency service, with same-day appointments available
- Most tank water heater repairs cost $150 to $700
- Upfront, flat-rate pricing before any work starts
Need a Replacement Water Heater?
Free in-home estimates with a written price before any work starts.
- 40- and 50-gallon Bradford White tanks in stock for fast replacement
- Power-vent and Navien tankless options
- Removal and haul-away of the old water heater included
- Financing available on projects over $2,000
When Does a Power-Vent Water Heater Make Sense?
A power-vent water heater makes sense when there is no usable chimney, the chimney is too large after a high-efficiency furnace was installed or the water heater needs to vent through a side wall. Power-vent units use a fan to move exhaust, which changes what is possible with venting. These are the conditions that point that direction.
- The vent route is restrictiveA fan allows longer horizontal runs and different termination points than some conventional atmospheric tanks can support.
- No usable chimneyWhen an existing chimney is unlined, shared or no longer appropriate, power venting can provide a compliant alternative.
- The mechanical room has movedRemodels and finished basements sometimes leave the water heater in a location the original vent arrangement does not suit.
- Electrical power is availableThe blower and controls require an appropriate electrical supply, so a nearby circuit makes the option practical.
- Combustion air is limitedTight or enclosed spaces may need a specific venting and combustion-air approach that power venting can address.
- Drainage is availableThe installation still needs proper drainage and a compliant termination location, which we confirm before recommending equipment.
The unit still needs proper combustion air, electrical power, drainage and a compliant termination location. Pure Comfort evaluates those requirements before recommending equipment.
How We Plan a Power-Vent Installation
Power-vent projects require careful attention to details that are easy to treat as an afterthought.
- Size for demand. We review household demand, tank capacity and recovery needs before selecting equipment.
- Plan the vent route. Gas supply, electrical access, vent material and route, termination clearances, drainage and service space are all mapped out.
- Complete the installation. Our in-house team removes the old equipment and completes the water, gas, electrical, vent and safety connections required by the model.
- Start up and verify. Startup confirms burner operation, blower performance, venting, temperature control and leak-free connections before walkthrough.
Repair, Standard Tank or Power-Vent Replacement?
Choose a standard tank when the existing chimney venting is safe and adequate, and a power-vent tank when it is not. When replacement is required, the best choice depends on more than matching the old configuration.
The existing venting supports it
If the current vent arrangement remains appropriate, a conventional atmospheric tank is often the simpler and less expensive project.
Venting is the limiting factor
When the vent route, chimney condition or equipment location is the constraint, power venting opens up options a standard tank cannot.
THE FOUR THINGS WE WEIGH
Household hot-water needs
Peak use, fixture count and recovery rate determine the capacity before anything else is decided.
What the route allows
Vent material, length, termination clearance and combustion air often decide the equipment type.
Gas and electrical access
Available gas input and a suitable electrical supply for the blower and controls.
Room to install and service
Clearances, drainage and future service access in the mechanical room.
Related service: Water Heater Repair
Venting Details Matter
Pure Comfort has installed water heaters around Streamwood since 2008, supported by Gene’s early hands-on experience with water-heating equipment.
- Venting planned firstVent length, material, termination location and manufacturer instructions are worked out before installation day.
- In-house installersOur own crews complete the water, gas, electrical and vent connections on the project.
- Tested at startupWe test the completed system rather than treating the blower as a simple add-on to a standard tank swap.
- Honest recommendationsIf a standard tank or tankless system suits the home better, we say so rather than defaulting to one product.
Capacity, Venting and Control Options
Power-vent water heaters are available in different storage capacities and recovery rates. The best fit depends on peak demand, fuel input, vent limitations and the space available for service.
Equipment choice and location also affect operating sound, which is worth discussing during planning rather than after installation.
WHAT WE COMPARE FOR YOU
The equipment decision depends on the mechanical room as much as the household.
- Storage capacity and recovery rate
- Fuel input and gas supply requirements
- Vent material, length and termination
- Electrical supply for blower and controls
- Operating sound and equipment placement
- Drainage and service clearances
Water Heaters We Install: Good, Better, Best
We install Bradford White tank water heaters, made in the USA, and Navien condensing tankless water heaters. Here's how the options compare, from a simple tank swap to endless hot water.
Bradford White Atmospheric Tank
The standard natural-draft gas tank. The simplest, most affordable swap when your home already has a chimney or metal vent.
- 40, 50 and 75 gallon
- Vents into your existing chimney or flue
- We stock 40 and 50 gallon for fast replacement
Bradford White Power Vent Tank
A fan pushes exhaust out through PVC pipe, so it can vent out a side wall. Great when the chimney is gone or the furnace no longer shares it.
- 40, 50 and 75 gallon
- Sidewall venting with PVC pipe
- Fixes orphaned-chimney problems
Navien Tankless
Heats water on demand, so you never run out. Ultra-high-efficiency condensing design that frees up floor space.
- Endless hot water
- Up to 0.96 UEF efficiency
- NPE-240A2 has built-in recirculation for faster hot water
Compare our water heater options
| Model | Type | Sizes | Venting | Good for | Details |
|---|---|---|---|---|---|
| Good · Bradford White atmospheric tank | |||||
| Bradford White Atmospheric | Gas tank, natural draft | 40, 50 or 75 gal | Existing chimney or metal flue | Straight replacement, best value | Manufacturer ↗ |
| Better · Bradford White power vent tank | |||||
| Bradford White Power Vent | Gas tank, fan-assisted | 40, 50 or 75 gal | PVC through a side wall | No usable chimney, flexible placement | Manufacturer ↗ |
| Best · Navien condensing tankless | |||||
| Navien NPE-240S2 | Condensing tankless | Up to 5.8 GPM at a 67°F rise | PVC through a wall or roof | Endless hot water, top efficiency | Manufacturer ↗ |
| Navien NPE-240A2 | Condensing tankless with ComfortFlow | Up to 5.6 GPM at a 67°F rise | PVC through a wall or roof | Endless hot water with built-in recirculation | Manufacturer ↗ |
Tankless specs from navieninc.com as of October 2026. We size every water heater to your household and handle haul-away of the old unit.
Power-Vent Pricing and Financing
Water heater projects over $2,000 can be financed with longer terms for a lower monthly payment, subject to credit approval. Equipment availability, promotions and warranty coverage vary by model and can change.
Pure Comfort confirms current options, registration requirements and applicable coverage during the estimate.
Financing
Projects Over $2,000
Longer terms with interest for lower monthly payments, subject to credit approval.
Free
In-Home Estimates
In writing, with no obligation.
Local Experience With Finished Installations
Pure Comfort’s project library includes power-vent water heaters installed in local homes. Those installations show how vent routing, termination, drainage and electrical access shape the finished project.
That first-hand experience is particularly useful in older mechanical rooms where a previous vent route may not suit the selected replacement equipment.
Real Reviews. Real Comfort.
When you need HVAC due to an unexpected event you want someone who not only can provide the service you need….
Great service. Very professional. They try all avenues to resolve issues with equipment. Always a pleasure to work….
Had an issue with the thermostat reading erroneously, as soon as I contacted Pure Comfort, they got back….
Our serviceman, Gene, was very responsive, professional and thorough. He explained each aspect of the issue clearly and….
I called them at 7am with no heat, the only available spot they had was in the afternoon, 5 minutes later they called….
Gene was professional, on-time, very friendly and did a thorough job inspecting our A/C unit. He also checked….
Quick and honest service and advice last minute on a Sunday. Clean crew and equipment. Gene was a knowledgeable….
Gene did not give up on the problem. It was a crazy situation but he never gave up found the problem and fixed it. Thank you….
Furnace wasnt working. Called Pure Comfort after hours and they came right out and helped me. The furnace….
Very professional, definitely knowledgeable had the furnace fixed in 10 minutes. I can honestly say I trusted Gene….
Power-Vent Water Heater FAQs
What is a power-vent water heater?
It is a storage water heater that uses a fan to move combustion exhaust through an approved vent system.
Does it need electricity?
Yes. The blower and controls require an appropriate electrical supply.
Is power vent the same as tankless?
No. Power-vent equipment stores heated water in a tank, while tankless equipment heats water as it flows.
Can it use the existing vent?
Sometimes, but vent material, size, route and termination must match the new equipment requirements.
Is the blower noisy?
It produces operating sound. Equipment choice and location should be discussed during planning.
How is capacity selected?
Household demand, recovery rate, fuel input and peak use all matter.
How much does a power-vent water heater cost?
A power-vent water heater typically costs $3,200 to $3,800 installed for 40 gallons, $3,500 to $4,000 for 50 gallons and $4,200 to $5,200 for 75 gallons. Replacing an existing power vent is at the lower end. Running new vent pipe, gas piping changes, a new drain pan or ¾-inch main shut-off valve, a slim, tall or short tank, and copper or galvanized water lines can raise it. Water heater projects over $2,000 can be financed with longer terms for a lower monthly payment, subject to credit approval.
What is included with a power-vent water heater installation?
Every power-vent installation includes the new Bradford White power-vent water heater, removal and disposal of the old one, new dielectric unions, a new temperature and pressure relief valve with discharge piping to code, and reconnection of the gas, vent and hot and cold water lines. We add a new gas shut-off valve, vent piping or drain pan when the location needs one, then fill and purge the system, verify the blower and venting, leak-test every water and gas connection and complete a full startup and safety check.
What warranty comes with a power-vent water heater?
Our Bradford White power-vent water heaters come with a 6-year manufacturer warranty on parts, and Pure Comfort adds a 1-year labor warranty on the installation.
How often should a water heater be maintained?
Once a year. A tank water heater should be flushed yearly to clear sediment, with the anode rod checked every few years. A tankless water heater should be descaled about once a year, more often with hard water. We can do either during a service visit.
Power-Vent Water Heater Installation Across the Northwest Suburbs
Based in Streamwood and installing water heaters throughout the surrounding communities. Pick your town to see local details, or give us a call and we will tell you straight away whether your address is in range.
Not on the list? We cover much of the northwest suburbs, so call and we will confirm your address in a minute.
Plan the Venting Before Choosing the Tank
Tell us about the household, the current unit and where it is installed. We will confirm that a power-vent system fits the demand, utilities and mechanical-room conditions.
- You get a scheduled window and the technician's name
- We map the vent route before recommending equipment
- In-home estimates are free, with no obligation
Leaking right now? Call us at (708) 515-4822 and turn the unit off until we can look at it.
Request Service or a Free Replacement Estimate
Tank vs Power Vent vs Tankless Water Heaters Compared
As of October 2026, a standard tank water heater is the lowest installed price, a power vent tank solves venting problems when there is no usable chimney, and a Navien tankless unit gives endless hot water with the longest warranty.
| Option | Installed price | Venting | Warranty | Best for | Learn more |
|---|---|---|---|---|---|
| Standard tank (gas) | 40 gal $1,600 to $2,000; 50 gal $1,700 to $2,200; 75 gal $2,700 to $3,300 | Vents into an existing chimney or flue | 6-year manufacturer parts, 1-year Pure Comfort labor | Straight replacements with a working chimney | Standard tank water heaters |
| Power vent tank | 40 gal $3,200 to $3,800; 50 gal $3,500 to $4,000; 75 gal $4,200 to $5,200 | A fan pushes exhaust out through a side wall | 6-year manufacturer parts, 1-year Pure Comfort labor | Homes without a usable chimney, or after a high-efficiency furnace leaves the chimney oversized | Power vent water heaters |
| Tankless (Navien) | $4,500 to $6,500 | Vents through a side wall | 15-year heat exchanger, 5-year parts, 1-year Pure Comfort labor (subject to Navien terms and registration) | Endless hot water and saving floor space | Tankless water heaters |
More detail on our water heater installation page.
Rebates you may qualify for
2026 utility programs for Northern Illinois homes. Amounts checked October 2026.
| Program | Equipment | Rebate |
|---|---|---|
| Nicor Gas | High-efficiency tank water heater | $150 |
| Nicor Gas | Tankless gas water heater (ENERGY STAR, UEF .95+) | $150 |
| ComEd | Heat pump water heater | Up to $750 |
The federal 25C tax credit ended for systems installed after December 31, 2025. Illinois income-qualified HEAR heat pump rebates (up to $8,000) are not available yet as of October 2026, and projects finished before the program opens will not qualify. We confirm the current status on your written quote. ComEd discounts come off your invoice when a ComEd heat pump-trained contractor installs qualifying equipment. Nicor Gas rebates require qualifying equipment and Nicor’s rebate application. Programs can change, so we confirm what your home qualifies for on your written quote. Programs and amounts can change, so confirm current details on the utility sites before you buy. Official details: Nicor Gas rebates · ComEd heat pump discounts.
Licensed, certified and accredited
- Lennox Premier Dealer
- NATE-certified technicians
- EPA Section 608 certified
- BBB Accredited Business
- Licensed business in the Village of Streamwood
- Registered Illinois LLC
- Fully insured