Furnace Repair in Glendale Heights, IL
Glendale Heights homes from the 1960s through the 1980s are often on their second or third furnace, frequently squeezed into a hallway closet. Our diagnostic costs $75, or $99 evenings, weekends and holidays. Most repairs run $100 to $700. You approve a flat-rate price first, before work starts.
456 Google Reviews
Your Peace of Mind
Flexible Options
We're Here Anytime
Guaranteed
Need Furnace Repair in Glendale Heights?
Ranch, split-level, townhome or condo, we reach Glendale Heights in about 25 to 30 minutes from Streamwood.
- $75 diagnostic ($99 evenings, weekends & holidays)
- 24/7 emergency service, with same-day appointments available
- Trucks stocked with common furnace parts, so most repairs are done in one visit
- Upfront, flat-rate pricing before any work starts
Time for a New Furnace in Glendale Heights?
Free in-home estimates from a Lennox Premier Dealer, with a plan that fits your closet, return air and any association rules.
- Good, Better and Best options with upfront pricing
- Nicor Gas rebates applied where you qualify
- Financing available, including 0% APR on select Lennox systems during Lennox promotions
- Sized with a load calculation, installed and permitted
Quick Summary
Pure Comfort Heating and Cooling repairs furnaces in Glendale Heights, IL (60139) from our shop in Streamwood. The diagnostic is $75 ($99 evenings, weekends and holidays), most furnace repairs cost $100 to $700, and you approve a flat-rate price before any work starts. Phones are answered 24/7, same-day service is common, and stocked trucks finish most repairs in one visit. Call (708) 515-4822.
Reviewed by Gene Baldassano, owner and NATE- and EPA 608-certified HVAC technician since 2008 · Updated
Common Furnace Problems in Glendale Heights Homes
Glendale Heights was built mostly from the 1960s through the 1980s, with ranches, split-levels and a large share of townhomes and condos. Many furnaces sit in hallway closets or small utility rooms, where limited return air makes the furnace overheat and shut down on its limit switch.
Many homes here are on their second or third furnace. Flame sensors, igniters, inducer motors and control boards account for most repairs, and in townhomes with long vent and drain runs, a frozen condensate line is a common no-heat call in a cold snap.
How a Glendale Heights Furnace Repair Visit Works
Many Glendale Heights furnaces live in a hallway closet or small utility room, where a tight space can starve them of return air. So airflow gets close attention on our visits here. We start where the furnace starts, with the thermostat call. Then we follow the sequence through ignition and check the safeties, electrical parts, venting, drainage and airflow, including the limit switch that shuts an overheating furnace down.
We measure before we replace a part, so you never pay for one the furnace did not need. You get the cause and a flat-rate price before work begins. Because our trucks are stocked with common furnace parts, most furnaces are fixed on the first visit. We work on all major brands, including furnaces another company installed. For most brands we handle the manufacturer parts warranty claim and you pay labor only.
Repair or Replace Your Glendale Heights Furnace?
Because so many Glendale Heights homes are on their second or third furnace, the one you have now could be fairly new or well past its prime. Start with its age. In the Chicago area, a well-maintained gas furnace lasts about 15 to 20 years. Then apply the $5,000 rule by multiplying that age by the repair price.
Below $5,000, a repair usually makes sense. Above it, ask for a replacement price as well. One finding overrides the math: a cracked heat exchanger is a safety issue at any age. Replacement estimates in your home are free. Nicor Gas rebates apply to qualifying high-efficiency furnaces, and financing is available, including 0% APR on select Lennox systems during Lennox promotions.
Heating Services in Glendale Heights
Related services for Glendale Heights homeowners.
Glendale Heights Furnace Repair Cost and Timing
Expect about $300 for a typical Glendale Heights furnace repair, within a usual range of $100 to $700. Flame sensors and igniters, two of the most common fixes here, sit at the low end along with pressure switches. Inducer motors, control boards and blower motors cost more. If a closet furnace keeps shutting down on its limit switch, we look at the return air as well as the parts. You get a written, flat-rate price before we start.
| Job | Typical window | What changes the number |
|---|---|---|
| Diagnosis | Same day when a truck is open | Scheduling and after-hours demand |
| Furnace repair | Often same day | Smaller parts versus major safety or heat-exchanger work |
| AC repair | Same day to 48 hours | Electrical work versus sealed-system repair |
| Furnace or AC replacement | 1 to 2 install days after equipment arrives | Return-air work, two-story airflow, condenser placement, and installation access |
| Mini split or tankless | Site-specific | Electrical, gas, venting and installation location |
| Tune-up | 60 to 90 minutes | System age, condition and last service |
Diagnosis
Typical window
Same day when a truck is open
What changes it
Furnace repair
Typical window
Often same day
What changes it
AC repair
Typical window
Same day to 48 hours
What changes it
Furnace or AC replacement
Typical window
1 to 2 install days after equipment arrives
What changes it
Mini split or tankless
Typical window
Site-specific
What changes it
Tune-up
Typical window
60 to 90 minutes
What changes it
Why Glendale Heights Homeowners Choose Pure Comfort
Family-owned since 2008 and based in Streamwood, we are NATE and EPA 608 certified and answer the phone 24/7 for Glendale Heights homes in 60139.
Local and family-owned
Founded in Streamwood in 2008 and still owned and operated by the family who started it.
In-house technicians
Service and installation completed by our own crews, never subcontracted to another company.
Certified and insured
NATE and EPA Section 608 certified, fully licensed and insured for the work we carry out.
Lennox Premier Dealer
Premier Dealer standing, with service and repair covering all major HVAC makes and models.
Glendale Heights replacements have to respect the home’s layout: closet size, return-air space, filter sizing, venting and, in townhomes and condos, any association rules on equipment placement. Where a permit is required, we confirm the current Glendale Heights requirements and pull the permit, or help you file it in towns where the homeowner applies, then schedule any required inspection.
Not Sure Whether to Repair or Replace?
Is your second or third furnace still worth repairing? Tell us what it is doing. We will inspect it in your Glendale Heights home and give you the realistic options, without pressure.
Feedback From Homeowners We Serve
Glendale Heights homeowners have left Google reviews about our furnace installation, AC service and service visits. Read what they say about showing up on time, explaining the work and leaving a clean area behind.
Recent Glendale Heights installs
Equipment installed by our team in Glendale Heights homes.
What Glendale Heights homeowners say
“They were very professional and did a great job installing my new furnace. They removed all of the old furnace and left a clean work area. They answered all of my questions and concerns.”
Furnace installation
“NICK Vinny and Gene all were wonderful to work with the guys did a great job showed up on time. Everything works great very professional team.”
Installation
“Came quickly did the job and was fear. What more can you ask for a air conditioning man. Thank you. Love that it's a small business company too.”
AC service
“Nice person, Skilled workmanship, reasonable prices”
Service visit
When you need HVAC due to an unexpected event you want someone who not only can provide the service you need….
Great service. Very professional. They try all avenues to resolve issues with equipment. Always a pleasure to work….
Had an issue with the thermostat reading erroneously, as soon as I contacted Pure Comfort, they got back….
Our serviceman, Gene, was very responsive, professional and thorough. He explained each aspect of the issue clearly and….
I called them at 7am with no heat, the only available spot they had was in the afternoon, 5 minutes later they called….
Gene was professional, on-time, very friendly and did a thorough job inspecting our A/C unit. He also checked….
Quick and honest service and advice last minute on a Sunday. Clean crew and equipment. Gene was a knowledgeable….
Gene did not give up on the problem. It was a crazy situation but he never gave up found the problem and fixed it. Thank you….
Furnace wasnt working. Called Pure Comfort after hours and they came right out and helped me. The furnace….
Very professional, definitely knowledgeable had the furnace fixed in 10 minutes. I can honestly say I trusted Gene….
Furnace Repair Near Glendale Heights
Pure Comfort repairs furnaces throughout Glendale Heights and the towns around it, including furnace repair in Bloomingdale, furnace repair in Carol Stream and furnace repair in Addison.
Drive time: our shop in Streamwood is about 12 miles from Glendale Heights, roughly 25 to 30 minutes away via Lake Street (US-20) in normal traffic.
Zip codes: we cover Glendale Heights homes in 60139.
Furnace repair in nearby towns
- Glen EllynFurnace repair
- BloomingdaleFurnace repair
- Carol StreamFurnace repair
- LombardFurnace repair
- WheatonFurnace repair
Near Glendale Heights but not listed? We serve towns within about 20 miles of Streamwood. See all service areas or call (708) 515-4822.
Glendale Heights Furnace Repair FAQs
How much does furnace repair cost in Glendale Heights?
The diagnostic is $75, or $99 evenings, weekends and holidays. Most furnace repairs cost $100 to $700, and about $300 is typical. You approve a flat-rate price before any work starts.
How fast can you get to Glendale Heights?
Our Streamwood shop is about 12 miles from Glendale Heights, roughly 25 to 30 minutes via Lake Street (US-20) in normal traffic. We answer 24/7 and offer same-day furnace repair when a truck is open.
Why does my closet furnace keep overheating?
A furnace in a closet needs enough return air. A blocked filter, a missing return or closed doors can trip the high-limit switch. We measure airflow and explain the fix.
My condo furnace stopped during a cold snap. What happened?
On high-efficiency furnaces, a frozen condensate line or an exterior vent blocked by snow or ice will shut the furnace down. We clear the blockage and fix the cause.
Do you repair electric air handlers and electric heat?
Yes. We repair electric air handlers and electric heaters, including heat-strip elements, sequencers, relays and blower motors.
Do you repair furnace brands other than Lennox?
Yes. Pure Comfort is a Lennox Premier Dealer, but we repair all major furnace brands in Glendale Heights, including furnaces installed by other companies.
Schedule Furnace Repair in Glendale Heights
Schedule furnace service anywhere in Glendale Heights, from Glendale Lakes to Pheasant Ridge. We drive in from Streamwood, about 12 miles away, and most furnaces are fixed on the first visit.
- You get a scheduled window and the technician's name
- We diagnose and price the work before anything starts
- Replacement estimates are free, with no obligation
Call rather than using the form: (708) 515-4822. Forms are checked during business hours, so a phone call gets you a faster answer.
Schedule HVAC Service
Licensed, certified and accredited
- Lennox Premier Dealer
- NATE-certified technicians
- EPA Section 608 certified
- BBB Accredited Business
- Licensed business in the Village of Streamwood
- Registered Illinois LLC
- Fully insured