Furnace Repair in Bloomingdale, IL
Many Bloomingdale homes still run an original high-efficiency furnace that is now 25 years old or more. We diagnose it for $75 ($99 evenings, weekends and holidays). Most repairs cost $100 to $700, and you approve a flat-rate price before any work starts.
456 Google Reviews
Your Peace of Mind
Flexible Options
We're Here Anytime
Guaranteed
Need Furnace Repair in Bloomingdale?
Our Streamwood shop is about 20 to 25 minutes away via Lake Street (US-20), serving every Bloomingdale home in 60108.
- $75 diagnostic ($99 evenings, weekends & holidays)
- 24/7 emergency service, with same-day appointments available
- Trucks stocked with common furnace parts, so most repairs are done in one visit
- Upfront, flat-rate pricing before any work starts
Time for a New Furnace in Bloomingdale?
We fit new equipment to your two-story home or townhome closet. Free in-home estimates from a Lennox Premier Dealer.
- Good, Better and Best options with upfront pricing
- Nicor Gas rebates applied where you qualify
- Financing available, including 0% APR on select Lennox systems during Lennox promotions
- Sized with a load calculation, installed and permitted
Quick Summary
Pure Comfort Heating and Cooling repairs furnaces in Bloomingdale, IL (60108) from our shop in Streamwood. The diagnostic is $75 ($99 evenings, weekends and holidays), most furnace repairs cost $100 to $700, and you approve a flat-rate price before any work starts. Phones are answered 24/7, same-day service is common, and stocked trucks finish most repairs in one visit. Call (708) 515-4822.
Reviewed by Gene Baldassano, owner and NATE- and EPA 608-certified HVAC technician since 2008 · Updated
Furnace Not Working? Common Furnace Problems in Bloomingdale Homes
Most of Bloomingdale was built from the 1970s through the 1990s, with two-story homes, split-levels and a large number of townhomes. Many original high-efficiency furnaces are now 25 years old or more, and the ones that have been replaced once are often reaching their next repair cycle. Inducer motors, pressure switches, control boards and condensate problems are the most common repairs we make here.
In townhomes, the furnace often sits in a closet or utility room with long vent and drain runs to the outside, so a frozen condensate line or a blocked vent is a common no-heat call during a cold snap.
How a Bloomingdale Furnace Repair Visit Works
In a Bloomingdale townhome, the furnace often sits in a closet with a long vent and drain run behind it, so we follow both lines all the way outside. In a two-story home, we also look at how air reaches the upper floor. Every visit starts with the thermostat call. From there we trace the sequence through ignition and check the safeties, electrical parts, venting, drainage and airflow.
Nothing gets replaced until we have measured it. Before any work begins, you hear the cause and get a flat-rate price. Our trucks carry the common furnace parts, so most furnaces are fixed on the first visit. Any major brand is fine, even one another company installed. For most brands we file the manufacturer parts warranty claim, so you pay labor only.
Repair or Replace Your Bloomingdale Furnace?
A lot of Bloomingdale furnaces are originals or have been replaced only once, so age usually decides this question. A well-maintained gas furnace lasts about 15 to 20 years in the Chicago area, and many here are past 25. Try the $5,000 rule. Multiply the furnace’s age by the repair price.
If the total is under $5,000, repairing usually makes sense. Over $5,000, get a replacement price too. A cracked heat exchanger is a safety issue at any age, even on a newer replacement unit. If a new furnace is the better call, the in-home estimate is free. Nicor Gas rebates apply to qualifying high-efficiency furnaces, and financing is available, including 0% APR on select Lennox systems during Lennox promotions.
Heating Services in Bloomingdale
Related services for Bloomingdale homeowners.
Bloomingdale Furnace Repair Cost and Timing
Most Bloomingdale furnace repairs land between $100 and $700, with about $300 as the average. Flame sensors, igniters and pressure switches sit at the low end. Inducer motors, control boards and blower motors cost more, and those are the parts that tend to wear out on the older high-efficiency furnaces common here. Drain repairs, like a frozen condensate line in a townhome, also tend to stay at the low end. Either way, you see a written, flat-rate price before we start.
| Job | Typical window | What changes the number |
|---|---|---|
| Diagnosis | Same day when a truck is open | Scheduling and after-hours demand |
| Furnace repair | Often same day | Smaller parts versus major safety or heat-exchanger work |
| AC repair | Same day to 48 hours | Electrical work versus sealed-system repair |
| Furnace or AC replacement | 1 to 2 install days after equipment arrives | Return-air work, two-story airflow, condenser placement, and installation access |
| Mini split or tankless | Site-specific | Electrical, gas, venting and installation location |
| Tune-up | 60 to 90 minutes | System age, condition and last service |
Diagnosis
Typical window
Same day when a truck is open
What changes it
Furnace repair
Typical window
Often same day
What changes it
AC repair
Typical window
Same day to 48 hours
What changes it
Furnace or AC replacement
Typical window
1 to 2 install days after equipment arrives
What changes it
Mini split or tankless
Typical window
Site-specific
What changes it
Tune-up
Typical window
60 to 90 minutes
What changes it
Why Bloomingdale Homeowners Choose Pure Comfort
We are a family-owned shop founded in Streamwood in 2008, about 9 miles up Lake Street from Bloomingdale, and our phones are answered 24/7.
Local and family-owned
Founded in Streamwood in 2008 and still owned and operated by the family who started it.
In-house technicians
Service and installation completed by our own crews, never subcontracted to another company.
Certified and insured
NATE and EPA Section 608 certified, fully licensed and insured for the work we carry out.
Lennox Premier Dealer
Premier Dealer standing, with service and repair covering all major HVAC makes and models.
In Bloomingdale, replacement planning starts with whether the old furnace and ductwork were a good match in the first place, then how new equipment will fit your ducts, controls and installation space. Where a permit is required, we confirm the current Bloomingdale requirements and pull the permit, or help you file it in towns where the homeowner applies, then schedule any required inspection.
Not Sure Whether to Repair or Replace?
Not sure if the aging furnace in your Bloomingdale home is worth fixing? We will check it, show you what we find and lay out repair and replacement side by side.
Feedback From Homeowners We Serve
When a technician walks into your Bloomingdale home, trust matters as much as skill. Read what Bloomingdale homeowners have said in their Google reviews about how we communicate, how we treat the home and how the work holds up.
Recent Bloomingdale installs
Equipment installed by our team in Bloomingdale homes and businesses.
What Bloomingdale homeowners say
“The only hvac company I will call. They are honest and fair.”
Repeat customer
“Gene the owner of Pure Comfort and his team do an amazing job!”
Service visit
“great fast & friendly service!”
Service visit
When you need HVAC due to an unexpected event you want someone who not only can provide the service you need….
Great service. Very professional. They try all avenues to resolve issues with equipment. Always a pleasure to work….
Had an issue with the thermostat reading erroneously, as soon as I contacted Pure Comfort, they got back….
Our serviceman, Gene, was very responsive, professional and thorough. He explained each aspect of the issue clearly and….
I called them at 7am with no heat, the only available spot they had was in the afternoon, 5 minutes later they called….
Gene was professional, on-time, very friendly and did a thorough job inspecting our A/C unit. He also checked….
Quick and honest service and advice last minute on a Sunday. Clean crew and equipment. Gene was a knowledgeable….
Gene did not give up on the problem. It was a crazy situation but he never gave up found the problem and fixed it. Thank you….
Furnace wasnt working. Called Pure Comfort after hours and they came right out and helped me. The furnace….
Very professional, definitely knowledgeable had the furnace fixed in 10 minutes. I can honestly say I trusted Gene….
Furnace Repair Near Bloomingdale
Pure Comfort repairs furnaces throughout Bloomingdale and the towns around it, including furnace repair in Roselle, furnace repair in Carol Stream and furnace repair in Schaumburg.
Drive time: our shop in Streamwood is about 9 miles from Bloomingdale, roughly 20 to 25 minutes away via Lake Street (US-20) in normal traffic.
Zip codes: we cover Bloomingdale homes in 60108.
Furnace repair in nearby towns
- RoselleFurnace repair
- Glendale HeightsFurnace repair
- ItascaFurnace repair
- Carol StreamFurnace repair
- Hanover ParkFurnace repair
Near Bloomingdale but not listed? We serve towns within about 20 miles of Streamwood. See all service areas or call (708) 515-4822.
Bloomingdale Furnace Repair FAQs
How much does furnace repair cost in Bloomingdale?
The diagnostic is $75, or $99 evenings, weekends and holidays. Most furnace repairs cost $100 to $700, and about $300 is typical. You approve a flat-rate price before any work starts.
How fast can you get to Bloomingdale?
Our Streamwood shop is about 9 miles from Bloomingdale, roughly 20 to 25 minutes via Lake Street (US-20) in normal traffic. We answer 24/7 and offer same-day furnace repair when a truck is open.
My townhome furnace stopped during a cold snap. What happened?
On high-efficiency furnaces, a frozen condensate line or an exterior vent blocked by snow or ice will shut the furnace down. We clear the blockage, check the pressure switch and fix the cause so it does not happen again.
Should I repair a 20-year-old furnace?
Use the $5,000 rule: multiply the furnace’s age by the repair price. Under $5,000, repairing usually makes sense. Over $5,000, it is worth getting a replacement price too. A cracked heat exchanger usually means replacement.
Why does my furnace start, then shut off after a few minutes?
Short cycling is often a dirty flame sensor, a pressure switch fault from a blocked vent or condensate trap, or overheating from poor airflow. We test each one before quoting a repair.
Do you repair furnace brands other than Lennox?
Yes. Pure Comfort is a Lennox Premier Dealer, but we repair all major furnace brands in Bloomingdale, including furnaces installed by other companies.
What is the $5,000 rule for furnace repair?
Multiply the age of the furnace by the repair price. If the total is more than $5,000, replacing usually makes more sense than repairing. For example, a $350 repair on a 16-year-old furnace comes to $5,600. It is a rule of thumb, not a hard cutoff, so we give you both options in writing.
Schedule Furnace Repair in Bloomingdale
Book a furnace visit for your Bloomingdale home in 60108. We come from Streamwood, about 20 to 25 minutes away, with a stocked truck and a flat-rate price before any work.
- You get a scheduled window and the technician's name
- We diagnose and price the work before anything starts
- Replacement estimates are free, with no obligation
Call rather than using the form: (708) 515-4822. Forms are checked during business hours, so a phone call gets you a faster answer.
Schedule HVAC Service
Licensed, certified and accredited
- Lennox Premier Dealer
- NATE-certified technicians
- EPA Section 608 certified
- BBB Accredited Business
- Licensed business in the Village of Streamwood
- Registered Illinois LLC
- Fully insured