Home / Locations / Barrington Hills / Furnace Repair in Barrington Hills, IL
Furnace Repair in Barrington Hills, IL
Barrington Hills properties often have more than one furnace, plus a guest house or barn with its own heat, and some run on propane. The diagnostic is $75 ($99 evenings, weekends and holidays). Most repairs cost $100 to $700, and you approve a flat-rate price before any work starts.

456 Google Reviews

Your Peace of Mind

Flexible Options

We're Here Anytime

Guaranteed
Need Furnace Repair in Barrington Hills?
Estates, horse properties and outbuildings across the village, about 20 minutes from Streamwood depending on location.
- $75 diagnostic ($99 evenings, weekends & holidays)
- 24/7 emergency service, with same-day appointments available
- Trucks stocked with common furnace parts, so most repairs are done in one visit
- Upfront, flat-rate pricing before any work starts
Time for a New Furnace in Barrington Hills?
Replacing one of several systems on your property? Get a free in-home estimate from a Lennox Premier Dealer.
- Good, Better and Best options with upfront pricing
- Nicor Gas rebates applied where you qualify
- Financing available, including 0% APR on select Lennox systems during Lennox promotions
- Sized with a load calculation, installed and permitted
Quick Summary
Pure Comfort Heating and Cooling repairs furnaces in Barrington Hills, IL (60010, 60021 and 60102) from our shop in Streamwood, about 20 minutes away. The diagnostic is $75 ($99 evenings, weekends and holidays), most furnace repairs cost $100 to $700, and you approve a flat-rate price before any work starts. Phones are answered 24/7, same-day service is common, and stocked trucks finish most repairs in one visit. Call (708) 515-4822.
Reviewed by Gene Baldassano, owner and NATE- and EPA 608-certified HVAC technician since 2008 · Updated
Common Furnace Problems in Barrington Hills Homes
Most Barrington Hills homes sit on lots of several acres, and many are large custom homes with more than one furnace or air handler, zoned ductwork and finished lower levels. Some properties also have guest houses, pool houses, garages or barns with their own heating. When one zone or building stops heating, we check the zone dampers, controls and thermostat wiring along with the furnace itself, and we confirm the fuel source, natural gas or propane, before testing gas pressure and combustion. The most common repairs are igniters, flame sensors, inducer motors, control boards and pressure switches.
How a Barrington Hills Furnace Repair Visit Works
A Barrington Hills visit often starts with a question: which system stopped heating? It may be one of several furnaces in the main house, or the heat in a guest house, pool house or barn. We confirm the fuel source, natural gas or propane, before testing gas pressure and combustion. From there, we trace the heating sequence from the thermostat call through ignition. Safeties, electrical parts, venting, drainage and airflow all get checked. When one zone is cold, we test the dampers, controls and thermostat wiring too. Nothing is replaced until it has been measured. You learn the cause and see a flat-rate price before work begins. Our trucks carry common furnace parts, so most furnaces are fixed on the first visit. We repair all major brands, including furnaces installed by other companies, and for most brands we handle the manufacturer parts warranty claim so you pay labor only.
Repair or Replace Your Barrington Hills Furnace?
On a property with several systems, the furnaces may not be the same age, so we look at each one on its own. A well-maintained gas furnace lasts about 15 to 20 years in the Chicago area. For any single unit, the $5,000 rule helps. Multiply that furnace’s age by the repair price. Under $5,000, a repair usually makes sense. Over $5,000, get a replacement price too. A cracked heat exchanger is a safety issue at any age, whether it heats the main house or a barn. In-home estimates are free. Nicor Gas rebates apply to qualifying high-efficiency furnaces. Financing is available, including 0% APR on select Lennox systems during Lennox promotions.
Heating Services in Barrington Hills
Related services for Barrington Hills homeowners.
Barrington Hills Furnace Repair Cost and Timing
Most furnace repairs in Barrington Hills cost $100 to $700, and about $300 is the average. Igniters, flame sensors and pressure switches are on the low end and among the repairs we make most here. Inducer motors, control boards and blower motors cost more. Equipment in attics or outbuildings can take longer to reach, so access is part of the diagnosis. Either way, you get a written, flat-rate price before work starts.
| Job | Typical window | What changes the number |
|---|---|---|
| Diagnosis | Same day when a truck is open | Scheduling and after-hours demand |
| Furnace repair | Often same day | Smaller parts versus major safety or heat-exchanger work |
| AC repair | Same day to 48 hours | Electrical work versus sealed-system repair |
| Furnace or AC replacement | 1 to 2 install days after equipment arrives | Return-air work, two-story airflow, condenser placement, and installation access |
| Mini split or tankless | Site-specific | Electrical, gas, venting and installation location |
| Tune-up | 60 to 90 minutes | System age, condition and last service |
Diagnosis
Typical window
Same day when a truck is open
What changes it
Furnace repair
Typical window
Often same day
What changes it
AC repair
Typical window
Same day to 48 hours
What changes it
Furnace or AC replacement
Typical window
1 to 2 install days after equipment arrives
What changes it
Mini split or tankless
Typical window
Site-specific
What changes it
Tune-up
Typical window
60 to 90 minutes
What changes it
Why Barrington Hills Homeowners Choose Pure Comfort
Barrington Hills properties can have several furnaces, zoned ducts and heated outbuildings, and we plan service around the whole property.
Local and family-owned
Founded in Streamwood in 2008 and still owned and operated by the family who started it.
In-house technicians
Service and installation completed by our own crews, never subcontracted to another company.
Certified and insured
NATE and EPA Section 608 certified, fully licensed and insured for the work we carry out.
Lennox Premier Dealer
Premier Dealer standing, with service and repair covering all major HVAC makes and models.
Replacement planning in Barrington Hills sizes each system to the area it serves, confirms natural gas or propane, and accounts for long duct runs and equipment in attics, basements or outbuildings. Where a permit is required, we confirm the current Village of Barrington Hills requirements and pull the permit, or help you file it in towns where the homeowner applies, then schedule any required inspection.
Not Sure Whether to Repair or Replace?
Several systems, different ages, one stubborn cold zone? We will sort out what each furnace needs and compare realistic options for your Barrington Hills property.
Feedback From Homeowners We Serve
Service on a large Barrington Hills property can take our technicians through several buildings. See what customers say about Pure Comfort’s communication, care and workmanship, backed by a 5.0 rating across more than 456 Google reviews.
What Barrington-area homeowners say
“Great experience overall - called in late afternoon and they still offered same-day service. Tech appeared on time and communicated throughout his inspections. Articulated all we needed to do immediately for whole house fan and AC unit and then in future visits. Fair pricing. Thank you!”
Same-day AC service
“Very pleasant, knowledgeable, and explained things so I could understand them”
Service visit
“Jose with Pure Comfort has been great to work with. He takes photos of issues and takes time to explain things. He cleans up if he has any mess and is knowledgeable on issues and their resolution. Very pleased with their services.”
Repeat customer
When you need HVAC due to an unexpected event you want someone who not only can provide the service you need….
Great service. Very professional. They try all avenues to resolve issues with equipment. Always a pleasure to work….
Had an issue with the thermostat reading erroneously, as soon as I contacted Pure Comfort, they got back….
Our serviceman, Gene, was very responsive, professional and thorough. He explained each aspect of the issue clearly and….
I called them at 7am with no heat, the only available spot they had was in the afternoon, 5 minutes later they called….
Gene was professional, on-time, very friendly and did a thorough job inspecting our A/C unit. He also checked….
Quick and honest service and advice last minute on a Sunday. Clean crew and equipment. Gene was a knowledgeable….
Gene did not give up on the problem. It was a crazy situation but he never gave up found the problem and fixed it. Thank you….
Furnace wasnt working. Called Pure Comfort after hours and they came right out and helped me. The furnace….
Very professional, definitely knowledgeable had the furnace fixed in 10 minutes. I can honestly say I trusted Gene….
Furnace Repair Near Barrington Hills
Pure Comfort repairs furnaces throughout Barrington Hills and the towns around it, including furnace repair in Barrington, furnace repair in South Barrington and furnace repair in Algonquin.
Drive time: our shop in Streamwood is about 10 miles from Barrington Hills, roughly 20 minutes away in normal traffic depending on the part of the village.
Zip codes: we cover Barrington Hills homes in 60010, 60021 and 60102.
Furnace repair in nearby towns
- BarringtonFurnace repair
- CarpentersvilleFurnace repair
- CaryFurnace repair
- North BarringtonFurnace repair
- Lake BarringtonFurnace repair
Near Barrington Hills but not listed? We serve towns within about 20 miles of Streamwood. See all service areas or call (708) 515-4822.
Barrington Hills Furnace Repair FAQs
How much does furnace repair cost in Barrington Hills?
The diagnostic is $75, or $99 evenings, weekends and holidays. Most furnace repairs cost $100 to $700, and about $300 is typical. You approve a flat-rate price before any work starts.
How fast can you get to Barrington Hills?
Our Streamwood shop is about 10 miles from Barrington Hills, roughly 20 minutes in normal traffic. We answer 24/7 and offer same-day furnace repair when a truck is open.
Why does my furnace start, then shut off after a few minutes?
Short cycling is often a dirty flame sensor, a pressure switch fault from a blocked vent or condensate trap, or overheating from poor airflow. We test each one before quoting a repair.
My furnace and water heater share a chimney. Is that a problem?
It can be, especially after one appliance is replaced. If the furnace now vents through plastic pipe, the water heater may be left in a chimney that is too large for it to draft well. We check draft and venting on older systems.
Should I repair a 20-year-old furnace?
Use the $5,000 rule: multiply the furnace’s age by the repair price. Under $5,000, repairing usually makes sense. Over $5,000, it is worth getting a replacement price too. A cracked heat exchanger usually means replacement.
Do you repair furnace brands other than Lennox?
Yes. Pure Comfort is a Lennox Premier Dealer, but we repair all major furnace brands in Barrington Hills, including furnaces installed by other companies.
Schedule Furnace Repair in Barrington Hills
Call 24/7 or book online for furnace repair in Barrington Hills, whether your address is in 60010, 60021 or 60102.
- You get a scheduled window and the technician's name
- We diagnose and price the work before anything starts
- Replacement estimates are free, with no obligation
Call rather than using the form: (708) 515-4822. Forms are checked during business hours, so a phone call gets you a faster answer.





