Home / Locations / Des Plaines / Furnace & Heating Repair in Des Plaines, IL
Furnace & Heating Repair in Des Plaines, IL
More than 40 percent of Des Plaines homes date to the 1950s and 1960s, and most of those brick ranches and Cape Cods are on a third or fourth furnace. Most heating repairs here land between $245 and $770, all-in, and the $75 diagnostic comes off when you approve the work.

456 Google Reviews

Your Peace of Mind

Flexible Options

We're Here Anytime

Guaranteed
Need Furnace Repair in Des Plaines?
Brick ranch, raised ranch or Cape Cod in 60016 or 60018? We come in on I-90, about 35 minutes.
- $75 diagnostic, waived when you approve the repair
- 24/7 emergency service, with same-day appointments available
- Trucks stocked with common furnace parts, so most repairs are done in one visit
- Upfront, flat-rate pricing before any work starts
Time for a New Furnace in Des Plaines?
Upgrading a Des Plaines furnace can change the chimney venting too. Get a free in-home estimate from a Lennox Premier Dealer.
- Good, Better and Best options with upfront pricing
- Nicor Gas rebates applied where you qualify
- Financing available, including 0% APR on select Lennox systems during Lennox promotions
- Sized with a load calculation, installed and permitted
Quick Summary
Pure Comfort Heating and Cooling repairs furnaces in Des Plaines, IL (60016 and 60018) from our shop in Streamwood, about 35 minutes away. As of November 2026, most furnace and heating repairs cost $245 to $770, flat-rate with parts and labor included: flame sensors $245 to $275, igniters $245 to $305 and pressure switches $250 to $355. The $75 diagnostic is waived when you approve the repair, maintenance plan members save 10 to 15%, phones are answered 24/7 and stocked trucks finish most repairs in one visit. Call (708) 515-4822.
Reviewed by Gene Baldassano, owner and NATE- and EPA 608-certified HVAC technician since 2008 · Updated
No Heat in Des Plaines? What Usually Goes Wrong
More than 40 percent of Des Plaines homes were built in the 1950s and 1960s, so most are on their third or fourth furnace. Many still have original ductwork, small returns and a furnace that shares a chimney with the water heater. Overheating, short cycling and cold back bedrooms are often airflow or venting problems rather than a failed part.
When a furnace in these homes is replaced with a high-efficiency model, the water heater can be left alone in a chimney that is too large for it, so we check draft and venting on every older system. Flame sensors, igniters, inducer motors and control boards make up most of the repairs we make in Des Plaines.
How a Des Plaines Furnace Repair or Heating Service Visit Works
Cold back bedrooms in a Des Plaines ranch often have nothing to do with a broken part. The original ducts or small returns are a common cause. That is why we never guess. Each visit traces the heating sequence from the thermostat call through ignition. We then check the safeties, electrical parts, venting, drainage and airflow. Many homes here have a furnace sharing a chimney with the water heater, so we test draft every time. The rest of the visit follows the same order every time. The technician runs a heat call and watches each step: inducer, pressure switch, igniter, gas valve and flame proof. A failed part is confirmed with a meter or manometer, not guessed at. You get a written flat-rate price, and the work starts only after you approve it. Stocked trucks mean most repairs finish the same day, on any brand, with warranty parts claimed for you when they qualify. Common parts travel on our trucks, so most furnaces are fixed on the first visit. For most brands, we handle the manufacturer parts warranty claim, so you pay labor only.
Repair vs. Replace for Des Plaines Furnaces
A furnace in a 1950s Des Plaines ranch may be the third or fourth one that house has had. A well-maintained gas furnace lasts about 15 to 20 years in the Chicago area. Apply the $5,000 rule: multiply the furnace’s age by the repair price. Under $5,000, repair usually makes sense; over $5,000, get a replacement price too. A cracked heat exchanger is a safety issue at any age. Replacement estimates are free, Nicor Gas rebates apply to qualifying high-efficiency furnaces, and financing is available, including 0% APR on select Lennox systems during Lennox promotions. When a repair comes up, use the $5,000 rule. If the total is under $5,000, repair usually makes sense. Over $5,000, get a replacement price as well. Replacing here can also mean a chimney liner or venting change for the water heater, and we account for that in the free in-home estimate.
More Heating Services in Des Plaines
Services Des Plaines homeowners book with us.
How Much Is Furnace Repair in Des Plaines?
Most Des Plaines furnace repairs cost $245 to $770, and about $300 is average. Flame sensors and igniters, two of the most common repairs here, sit at the low end along with pressure switches. The price depends on the part, not the hours. A flame sensor or igniter is at the bottom of the $245 to $770 range, and motors and control boards are at the top or above it. You see the full price in writing first, and the diagnostic is dropped when you approve the repair. Overheating and short cycling in older homes are often airflow or venting problems instead of a failed part.
| Repair | Typical price | Common symptom |
|---|---|---|
| Flame sensor | $245 to $275 | Furnace lights, then shuts off after a few seconds |
| Hot surface igniter | $245 to $305 | No glow, no flame, furnace locks out |
| Pressure switch or hose | $250 to $355 | Inducer runs but burners never light |
| High-limit or rollout switch | $325 to $340 | Furnace overheats or shuts down mid-cycle |
| Condensate trap or drain clearing | $290 to $410 | Water around the furnace, pressure switch error codes |
| Control transformer | $325 | No power to the thermostat or controls |
| Minor gas leak repair | $200 to $365 | Gas smell at a fitting or union |
| Gas valve | $505 to $1,120 | Igniter glows but no gas flows |
| Control board | $475 to $1,200 | No response, flashing error codes, dead blower |
| Inducer motor | $400 to $1,095 | Loud humming or grinding before startup |
| Blower motor | $830 to $2,220 | Burners run but no air comes out of the vents |
How our repair pricing works
- Every price is flat-rate, with parts and labor included and no hourly charges. You approve it before work starts.
- The $75 diagnostic ($99 evenings, weekends and holidays) is waived when you approve the repair.
- Maintenance plan members save 10 to 15% on repairs. See our service agreements.
- Most furnace repairs cost $245 to $770. Blower motors, inducer motors and control boards are the bigger jobs.
Permit needs and any extra work are reviewed for the specific project. Windows are typical rather than guaranteed, since scheduling depends on current demand and technician availability.
What Des Plaines Homeowners Get With Pure Comfort
Des Plaines homes are mostly postwar ranches and Cape Cods, and we check chimneys, returns and original ducts before blaming the furnace.
Local, not a franchise
Local since 2008, from a shop in Streamwood, and still family-owned and operated.
Technicians on our payroll
No subcontractors. The people who diagnose your furnace are the people who fix it.
Trained and insured
Technicians carry NATE and EPA 608 certifications, and the company is licensed and insured.
Lennox Premier Dealer
A Lennox Premier Dealer that services Carrier, Trane, Goodman, Bryant, Rheem and the rest.
Many Des Plaines replacements are simple changeouts, but we plan for a chimney liner or venting change when the water heater stays behind, plus any return-air upgrade the back bedrooms need. A new furnace gets a load calculation, a venting and gas check and a look at the ductwork first. Where Des Plaines requires a permit, we pull it or help you file it, then book the inspection.
Still Not Sure What Is Wrong?
Cold upstairs in a Cape Cod, or a furnace that keeps short cycling? We will check it and compare realistic options for your Des Plaines home, including a ductless unit upstairs when it fits better.
Feedback From Homeowners We Serve
Real Google reviews from homeowners near Des Plaines, shown by town only.
Recent furnace repairs in Des Plaines
Repairs our technicians logged in Des Plaines homes. Locations are shown by ZIP code only.
- Jul 2026 · Des Plaines 60018Cleared or repaired the condensate drain
- Nov 2025 · Des Plaines 60016Replaced an inducer motor
- Oct 2025 · Des Plaines 60018Replaced a blower motor, and replaced a blower wheel
- Jan 2025 · Des Plaines 60016Replaced a hot surface igniter
What Des Plaines homeowners say
“The owner was very knowledgeable and responsive. The owner Gene was great he explained the service and provided me with updates as his work was being completed. Beat every competitor in the area. Great pricing! Thank you guys!”
HVAC project
“Made sure our new HVAC was right for our house. They corrected mistakes from previous work done on the house. They came on new year's day for an estimate that was better than the competition.”
New HVAC system
“Great service! The technician arrived on time, diagnosed the issue quickly, and completed the repair professionally. Highly recommend.”
Repair
“Very professional, clean, reliable and fast”
Service visit
“Excellent service! Always fast and reliable.”
Repeat customer
When you need HVAC due to an unexpected event you want someone who not only can provide the service you need….
Great service. Very professional. They try all avenues to resolve issues with equipment. Always a pleasure to work….
Had an issue with the thermostat reading erroneously, as soon as I contacted Pure Comfort, they got back….
Our serviceman, Gene, was very responsive, professional and thorough. He explained each aspect of the issue clearly and….
I called them at 7am with no heat, the only available spot they had was in the afternoon, 5 minutes later they called….
Gene was professional, on-time, very friendly and did a thorough job inspecting our A/C unit. He also checked….
Quick and honest service and advice last minute on a Sunday. Clean crew and equipment. Gene was a knowledgeable….
Gene did not give up on the problem. It was a crazy situation but he never gave up found the problem and fixed it. Thank you….
Furnace wasnt working. Called Pure Comfort after hours and they came right out and helped me. The furnace….
Very professional, definitely knowledgeable had the furnace fixed in 10 minutes. I can honestly say I trusted Gene….
Furnace Repair Near Des Plaines
Pure Comfort repairs furnaces throughout Des Plaines and the towns around it, including furnace repair in Elk Grove Village, furnace repair in Arlington Heights and furnace repair in Itasca.
Drive time: our shop in Streamwood is about 18 miles from Des Plaines, roughly 35 minutes away via I-90 in normal traffic.
Zip codes: we cover Des Plaines homes in 60016 and 60018.
Furnace repair in nearby towns
- Park RidgeFurnace repair
- Mount ProspectFurnace repair
- Elk Grove VillageFurnace repair
- Schiller ParkFurnace repair
- Arlington HeightsFurnace repair
Near Des Plaines but not listed? We serve towns within about 20 miles of Streamwood. See all service areas or call (708) 515-4822.
What Des Plaines Homeowners Ask About Furnace Repair
Is furnace repair in Des Plaines priced by the hour?
No. Every repair has a flat price that includes parts and labor, so a slow job does not cost you more. Most furnace repairs in Des Plaines cost $245 to $770; igniters start at $245 and inducer motors run $400 to $1,095. The diagnostic is $75, or $99 evenings, weekends and holidays, and it is waived when you approve the repair.
How fast can you get to Des Plaines?
Our Streamwood shop is about 18 miles from Des Plaines, roughly 35 minutes via I-90 in normal traffic. We answer 24/7 and offer same-day furnace repair when a truck is open. Our Streamwood shop is about 35 minutes from Des Plaines in normal traffic.
Do you check the chimney when you repair a furnace?
On older systems, yes. We check draft and look at the chimney and vent connections, since a shared chimney can cause problems after one appliance is changed.
Why are the back bedrooms of my ranch always colder?
Long duct runs, leaky joints and too little return air are common in older ranches. We measure airflow and explain whether balancing or duct changes would help.
Do you repair boilers and radiator heat?
Yes. We repair and replace gas boilers in older homes with radiators or baseboard heat, including circulator pumps, zone valves, expansion tanks and ignition controls.
Can you repair my Carrier or Trane furnace in Des Plaines?
Yes. Our technicians repair all major furnace brands, not just the Lennox systems we install, and our trucks carry universal parts.
Need Heat Back in Des Plaines?
Call now and we will schedule your Des Plaines furnace repair at the next open time.
- You get a scheduled window and the technician's name
- We diagnose and price the work before anything starts
- Replacement estimates are free, with no obligation
For no heat, call instead: (708) 515-4822. We read forms during business hours, so call for anything urgent.
Schedule HVAC Service
Licensed, certified and accredited
- Lennox Premier Dealer
- NATE-certified technicians
- EPA Section 608 certified
- BBB Accredited Business
- Licensed business in the Village of Streamwood
- Registered Illinois LLC
- Fully insured





