Home / Locations / HVAC Services in Schiller Park, IL / Furnace & Heating Repair in Schiller Park, IL
Furnace & Heating Repair in Schiller Park, IL
About 69 percent of Schiller Park homes were built between 1940 and 1969, including many two-flats with a furnace for each unit. Expect $245 to $770 for most furnace repairs, priced flat before work starts, and no diagnostic charge when you approve the repair.

456 Google Reviews

Your Peace of Mind

Flexible Options

We're Here Anytime

Guaranteed
Furnace Trouble in Schiller Park?
From the postwar single-family homes to the two-flats and small multi-unit buildings, our Streamwood shop is about 32 minutes away.
- Diagnostic fee dropped when you approve the work
- 24/7 phones and evening emergency appointments
- One-trip repairs for most no-heat problems
- You approve the price before any work
Comparing Repair to Replacement?
A Lennox Premier Dealer quote for your Schiller Park home, free and in writing.
- Good, Better and Best options with upfront pricing
- Nicor Gas rebates applied where you qualify
- Financing available, including 0% APR on select Lennox systems during Lennox promotions
- Sized with a load calculation, installed and permitted
Quick Summary
Pure Comfort Heating and Cooling repairs furnaces in Schiller Park, IL (60176) from our shop in Streamwood, about 32 minutes away. As of November 2026, most furnace and heating repairs cost $245 to $770, flat-rate with parts and labor included: flame sensors $245 to $275, igniters $245 to $305 and pressure switches $250 to $355. The $75 diagnostic is waived when you approve the repair, maintenance plan members save 10 to 15%, phones are answered 24/7 and stocked trucks finish most repairs in one visit. Call (708) 515-4822.
Reviewed by Gene Baldassano, owner and NATE- and EPA 608-certified HVAC technician since 2008 · Updated
No Heat in Schiller Park? What Usually Goes Wrong
About 69 percent of Schiller Park homes were built between 1940 and 1969, and many are two-flats and small multi-unit buildings where each unit has its own furnace in a closet or basement corner. Older furnaces often share a chimney with the water heater, and a blocked or deteriorating flue can trip the safety controls. Tight closets limit combustion air. Common failures are dirty flame sensors, cracked igniters, stuck pressure switches and worn inducer motors.
Our Furnace Repair Process in Schiller Park
In Schiller Park two-flats and multi-unit buildings, we confirm which furnace serves which unit, then check venting and combustion air, since shared chimneys and tight closets cause many shutdowns. From there, our method holds steady. We follow the heating sequence from the thermostat call through ignition, then check the safeties, electrical parts, venting, drainage and airflow. Parts are measured before anything is replaced, and you hear the cause and a flat-rate price before work begins. Our trucks carry the common furnace parts, so most furnaces are fixed on the first visit. We repair all major brands, and for most brands we handle the manufacturer parts warranty claim, so you pay labor only.
Repair vs. Replace for Schiller Park Furnaces
Many Schiller Park furnaces in two-flats are the same age, so when one needs a major repair, we can price both. Most gas furnaces here give 15 to 20 years with yearly maintenance. A quick test is the $5,000 rule: the furnace’s age times the repair price. If that number is under $5,000, fixing it is usually the better buy. If it is over, ask for a replacement quote as well, which we give free. A cracked heat exchanger means replacement no matter the age. Qualifying high-efficiency furnaces can get Nicor Gas rebates, and Lennox promotions sometimes include 0% APR financing.
Other Services for Schiller Park Homes
Related work we do across Schiller Park.
Schiller Park Heating Repair Pricing
The price depends on the part, not the hours. A flame sensor or igniter is at the bottom of the $245 to $770 range, and motors and control boards are at the top or above it. You see the full price in writing first, and the diagnostic is dropped when you approve the repair. In two-flats, we price each unit’s furnace separately.
| Repair | Typical price | Common symptom |
|---|---|---|
| Flame sensor | $245 to $275 | Furnace lights, then shuts off after a few seconds |
| Hot surface igniter | $245 to $305 | No glow, no flame, furnace locks out |
| Pressure switch or hose | $250 to $355 | Inducer runs but burners never light |
| High-limit or rollout switch | $325 to $340 | Furnace overheats or shuts down mid-cycle |
| Condensate trap or drain clearing | $290 to $410 | Water around the furnace, pressure switch error codes |
| Control transformer | $325 | No power to the thermostat or controls |
| Minor gas leak repair | $200 to $365 | Gas smell at a fitting or union |
| Gas valve | $505 to $1,120 | Igniter glows but no gas flows |
| Control board | $475 to $1,200 | No response, flashing error codes, dead blower |
| Inducer motor | $400 to $1,095 | Loud humming or grinding before startup |
| Blower motor | $830 to $2,220 | Burners run but no air comes out of the vents |
How our repair pricing works
- Every price is flat-rate, with parts and labor included and no hourly charges. You approve it before work starts.
- The $75 diagnostic ($99 evenings, weekends and holidays) is waived when you approve the repair.
- Maintenance plan members save 10 to 15% on repairs. See our service agreements.
- Most furnace repairs cost $245 to $770. Blower motors, inducer motors and control boards are the bigger jobs.
Any permit or added work is reviewed job by job before we start. Scheduling depends on demand and which technicians are open, so windows are estimates, not promises.
The Pure Comfort Difference in Schiller Park
Many Schiller Park buildings have a furnace per unit and shared chimneys, so we check venting on every call.
Local and family-owned
Founded in Streamwood in 2008 and still owned and operated by the family who started it.
Our own technicians
Every repair is done by our own employees, never passed to an outside crew.
Certified technicians
Fully insured and licensed, with NATE and EPA 608 certified technicians doing the work.
Lennox Premier Dealer status
Lennox Premier Dealer standing, and we fix furnaces other companies installed.
A new furnace gets a load calculation, a venting and gas check and a look at the ductwork first. Where Schiller Park requires a permit, we pull it or help you file it, then book the inspection.
Need a Straight Answer on Your Furnace?
Short cycling, a strange smell or a cold room upstairs all have a cause. We will find it and tell you whether a repair makes sense.
Feedback From Homeowners We Serve
Before you let someone into your home, see what your neighbors say about the visit and the work.
What Schiller Park homeowners say
“Very kind and professional technicians. Both responsive and confident in their work. Highly recommend!”
Service visit
When you need HVAC due to an unexpected event you want someone who not only can provide the service you need….
Great service. Very professional. They try all avenues to resolve issues with equipment. Always a pleasure to work….
Had an issue with the thermostat reading erroneously, as soon as I contacted Pure Comfort, they got back….
Our serviceman, Gene, was very responsive, professional and thorough. He explained each aspect of the issue clearly and….
I called them at 7am with no heat, the only available spot they had was in the afternoon, 5 minutes later they called….
Gene was professional, on-time, very friendly and did a thorough job inspecting our A/C unit. He also checked….
Quick and honest service and advice last minute on a Sunday. Clean crew and equipment. Gene was a knowledgeable….
Gene did not give up on the problem. It was a crazy situation but he never gave up found the problem and fixed it. Thank you….
Furnace wasnt working. Called Pure Comfort after hours and they came right out and helped me. The furnace….
Very professional, definitely knowledgeable had the furnace fixed in 10 minutes. I can honestly say I trusted Gene….
Furnace Repair Near Schiller Park
We also fix furnaces in the towns next to Schiller Park, including furnace repair in Franklin Park, furnace repair in Northlake and furnace repair in Park Ridge. From our Streamwood shop, it is about 32 minutes from Schiller Park in normal traffic. We serve Schiller Park homes in ZIP 60176.
Furnace repair in nearby towns
- Franklin ParkFurnace repair
- NorthlakeFurnace repair
- Park RidgeFurnace repair
- ElmhurstFurnace repair
- Des PlainesFurnace repair
Near Schiller Park but not listed? We serve towns within about 20 miles of Streamwood. See all service areas or call (708) 515-4822.
Schiller Park Furnace Repair FAQs
Is furnace repair in Schiller Park priced by the hour?
No. Every repair has a flat price that includes parts and labor, so a slow job does not cost you more. Most furnace repairs in Schiller Park cost $245 to $770; igniters start at $245 and inducer motors run $400 to $1,095. The diagnostic is $75, or $99 evenings, weekends and holidays, and it is waived when you approve the repair.
Can I get same-day furnace repair in Schiller Park?
Usually, yes. Phones are answered 24/7, and we fit no-heat calls in the same day whenever a truck is open, including evening windows until 8 pm. Schiller Park is about 32 minutes from our Streamwood shop.
Can you service both furnaces in our Schiller Park two-flat?
Yes. We repair furnaces in two-flats and small multi-unit buildings, price each unit separately and can schedule both in one visit when that helps.
Will you tell me if my old furnace is not worth repairing?
Yes. We apply the $5,000 rule (age times repair price) and tell you what we see. Under $5,000, we usually recommend the repair; over it, we price a replacement too, free, and you decide.
Is a furnace that shuts off by itself dangerous?
Usually it is the furnace protecting itself, which is what it should do. The cause still needs fixing, often a flame sensor, pressure switch or airflow problem. If you smell gas, leave the house and call the gas company first.
What furnace brands do you service in Schiller Park?
All major brands. We install Lennox as a Premier Dealer and repair Carrier, Trane, Goodman, Rheem, Bryant and the rest.
How do you decide whether to recommend a new furnace?
We start with the $5,000 rule (age times repair price), then look at the heat exchanger, the venting and how often the furnace has needed repairs. You get both options in writing.
Need Heat Back in Schiller Park?
Call any hour or book online for furnace repair anywhere in Schiller Park.
- You get a scheduled window and the technician's name
- We diagnose and price the work before anything starts
- Replacement estimates are free, with no obligation
Urgent? Skip the form and call (708) 515-4822. Form requests are answered during office hours.





