Furnace Repair in Batavia, IL
Batavia mixes century-old homes near the Fox River with postwar ranches and two-story subdivisions built from the 1980s on. Our diagnostic is $75 ($99 evenings, weekends and holidays). Most repairs fall between $100 and $700. Nothing gets done until you approve a flat-rate price.
456 Google Reviews
Your Peace of Mind
Flexible Options
We're Here Anytime
Guaranteed
Need Furnace Repair in Batavia?
From the historic homes near the Fox River to the newer subdivisions on the east and west sides, our Streamwood shop is about 36 minutes away.
- $75 diagnostic ($99 evenings, weekends & holidays)
- 24/7 emergency service, with same-day appointments available
- Trucks stocked with common furnace parts, so most repairs are done in one visit
- Upfront, flat-rate pricing before any work starts
Time for a New Furnace in Batavia?
A Lennox Premier Dealer offers free in-home replacement estimates in Batavia, with every furnace sized to the house.
- Good, Better and Best options with upfront pricing
- Nicor Gas rebates applied where you qualify
- Financing available, including 0% APR on select Lennox systems during Lennox promotions
- Sized with a load calculation, installed and permitted
Quick Summary
Pure Comfort Heating and Cooling repairs furnaces in Batavia, IL (60510) from our shop in Streamwood, about 36 minutes away. The diagnostic is $75 ($99 evenings, weekends and holidays), most furnace repairs cost $100 to $700, and you approve a flat-rate price before any work starts. Phones are answered 24/7, same-day service is common, and stocked trucks finish most repairs in one visit. Call (708) 515-4822.
Reviewed by Gene Baldassano, owner and NATE- and EPA 608-certified HVAC technician since 2008 · Updated
Furnace Not Working? Common Furnace Problems in Batavia Homes
Batavia’s housing runs from 1800s and early 1900s homes near the river and downtown to postwar ranches and the two-story subdivisions built from the 1980s through the 2000s. In those newer homes, the original high-efficiency furnaces are reaching the age when inducer motors, pressure switches, igniters and control boards wear out. Older homes converted from boilers or gravity heat often have tight ducts and few returns, which makes a furnace overheat and cycle off on its limit switch. Frozen condensate lines and blocked PVC vents are the most common no-heat calls in a cold snap.
How a Batavia Furnace Repair Visit Works
In Batavia, we start by checking how the house is heated, since some older homes near the river still run boilers. On forced-air homes, we look closely at return air and the condensate drain, because tight ducts and frozen drain lines cause many winter shutdowns here. From there, our method holds steady. We follow the heating sequence from the thermostat call through ignition. Then we check the safeties, electrical parts, venting, drainage and airflow. Parts are measured before anything is replaced. You hear the cause and a flat-rate price before work begins. Our trucks carry the common furnace parts, so most furnaces are fixed on the first visit. We repair all major brands, including furnaces from other installers. For most brands we handle the manufacturer parts warranty claim, so you pay labor only.
Repair or Replace Your Batavia Furnace?
Many Batavia furnaces in 1980s to 2000s homes are original or on their second replacement, and the 1990s and 2000s units are now at the age when major parts fail. A well-maintained gas furnace lasts about 15 to 20 years in the Chicago area. Apply the $5,000 rule: multiply the furnace’s age by the repair price. Under $5,000, repair usually makes sense. Over $5,000, get a replacement price too. A cracked heat exchanger is a safety issue at any age. Replacement estimates are free. Nicor Gas rebates apply to qualifying high-efficiency furnaces, and financing is available, including 0% APR on select Lennox systems during Lennox promotions.
Heating Services in Batavia
Related services for Batavia homeowners.
Batavia Furnace Repair Cost and Timing
In Batavia, most furnace repairs cost $100 to $700, with about $300 the average. Igniters, flame sensors and pressure switches sit at the low end. Inducer motors, control boards and blower motors cost more. In older homes with tight ductwork, we also price any return-air fix that keeps the new part from failing again. You approve a written, flat-rate price before work starts.
| Job | Typical window | What changes the number |
|---|---|---|
| Diagnosis | Same day when a truck is open | Scheduling and after-hours demand |
| Furnace repair | Often same day | Smaller parts versus major safety or heat-exchanger work |
| AC repair | Same day to 48 hours | Electrical work versus sealed-system repair |
| Furnace or AC replacement | 1 to 2 install days after equipment arrives | Return-air work, two-story airflow, condenser placement, and installation access |
| Mini split or tankless | Site-specific | Electrical, gas, venting and installation location |
| Tune-up | 60 to 90 minutes | System age, condition and last service |
Diagnosis
Typical window
Same day when a truck is open
What changes it
Furnace repair
Typical window
Often same day
What changes it
AC repair
Typical window
Same day to 48 hours
What changes it
Furnace or AC replacement
Typical window
1 to 2 install days after equipment arrives
What changes it
Mini split or tankless
Typical window
Site-specific
What changes it
Tune-up
Typical window
60 to 90 minutes
What changes it
Why Batavia Homeowners Choose Pure Comfort
Batavia homes range from river-district classics to 2000s subdivisions, so we check the whole system, not just the part that failed.
Local and family-owned
Founded in Streamwood in 2008 and still owned and operated by the family who started it.
In-house technicians
Service and installation completed by our own crews, never subcontracted to another company.
Certified and insured
NATE and EPA Section 608 certified, fully licensed and insured for the work we carry out.
Lennox Premier Dealer
Premier Dealer standing, with service and repair covering all major HVAC makes and models.
Our replacement process considers sizing, airflow, ductwork, filtration, venting, electrical requirements and controls. Where a permit is required, we confirm the current Batavia requirements and pull the permit, or help you file it in towns where the homeowner applies, then schedule any required inspection.
Not Sure Whether to Repair or Replace?
Furnace shutting down in a cold snap, or one room that never warms up? We will find the cause in your Batavia home and explain your options.
Feedback From Homeowners We Serve
Choosing an HVAC company means trusting the people who enter your home and the work they leave behind. Read recent customer feedback about Pure Comfort’s communication, care and workmanship.
What homeowners near Batavia say
“Gene and his crew did an excellent job installing a new furnace and air conditioner system. I recommend Pure Comfort in a heartbeat. 6 stars in my opinion.”
Furnace and AC installation
“We recently had Pure Comfort replace our furnace and air conditioner, and we couldn’t be happier with the experience. Their team was exceptionally knowledgeable and professional throughout the entire process.”
Furnace and AC replacement
“We worked with Gene from getting an estimate and through the installation. He was great at explaining everything letting us know what was the right option for our size home and our lifestyle. His pricing was competitive, but his service and his customer satisfaction is impeccable. Showed up on time, cleaned up and answered all our questions.”
Estimate and installation
“Gene is wonderful, fair and honest. Very professional.”
Service visit
When you need HVAC due to an unexpected event you want someone who not only can provide the service you need….
Great service. Very professional. They try all avenues to resolve issues with equipment. Always a pleasure to work….
Had an issue with the thermostat reading erroneously, as soon as I contacted Pure Comfort, they got back….
Our serviceman, Gene, was very responsive, professional and thorough. He explained each aspect of the issue clearly and….
I called them at 7am with no heat, the only available spot they had was in the afternoon, 5 minutes later they called….
Gene was professional, on-time, very friendly and did a thorough job inspecting our A/C unit. He also checked….
Quick and honest service and advice last minute on a Sunday. Clean crew and equipment. Gene was a knowledgeable….
Gene did not give up on the problem. It was a crazy situation but he never gave up found the problem and fixed it. Thank you….
Furnace wasnt working. Called Pure Comfort after hours and they came right out and helped me. The furnace….
Very professional, definitely knowledgeable had the furnace fixed in 10 minutes. I can honestly say I trusted Gene….
Furnace Repair Near Batavia
Pure Comfort repairs furnaces throughout Batavia and the towns around it, including furnace repair in St. Charles, furnace repair in West Chicago and furnace repair in Wayne. Drive time: our shop in Streamwood is about 36 minutes from Batavia in normal traffic. Zip codes: we cover Batavia homes in 60510.
Furnace repair in nearby towns
- St. CharlesFurnace repair
- West ChicagoFurnace repair
- WayneFurnace repair
- South ElginFurnace repair
- Carol StreamFurnace repair
Near Batavia but not listed? We serve towns within about 20 miles of Streamwood. See all service areas or call (708) 515-4822.
Batavia Furnace Repair FAQs
How much does furnace repair cost in Batavia?
The diagnostic is $75, or $99 evenings, weekends and holidays. Most furnace repairs cost $100 to $700, and about $300 is typical. You approve a flat-rate price before any work starts.
How fast can you get to Batavia?
Our Streamwood shop is about 36 minutes from Batavia in normal traffic. We answer 24/7 and offer same-day furnace repair when a truck is open.
My furnace keeps shutting off in an older Batavia home. Why?
Older homes converted from boilers or gravity heat often have small ducts and too few returns, so the furnace overheats and shuts off on its high-limit switch. We check the filter, blower and temperature rise first, then tell you whether a return-air change will stop it from happening again.
Should I repair a 20-year-old furnace?
Use the $5,000 rule: multiply the furnace’s age by the repair price. Under $5,000, repairing usually makes sense. Over $5,000, it is worth getting a replacement price too. A cracked heat exchanger usually means replacement.
Why does my furnace start, then shut off after a few minutes?
Short cycling is often a dirty flame sensor, a pressure switch fault from a blocked vent or condensate trap, or overheating from poor airflow. We test each one before quoting a repair.
Do you repair furnace brands other than Lennox?
Yes. Pure Comfort is a Lennox Premier Dealer, but we repair all major furnace brands in Batavia, including furnaces installed by other companies.
What is the $5,000 rule for furnace repair?
Multiply the age of the furnace by the repair price. If the total is more than $5,000, replacing usually makes more sense than repairing. For example, a $350 repair on a 16-year-old furnace comes to $5,600. It is a rule of thumb, not a hard cutoff, so we give you both options in writing.
Schedule Furnace Repair in Batavia
Call any hour or book online for furnace repair anywhere in Batavia (60510).
- You get a scheduled window and the technician's name
- We diagnose and price the work before anything starts
- Replacement estimates are free, with no obligation
Call rather than using the form: (708) 515-4822. Forms are checked during business hours, so a phone call gets you a faster answer.