Home / Locations / HVAC Services in Wayne, IL / Furnace Repair in Wayne, IL
Furnace Repair in Wayne, IL
Wayne homes sit on lots of one to three acres, and many run two or three furnaces for different wings and floors. Our diagnostic is $75 ($99 evenings, weekends and holidays). Most repairs fall between $100 and $700. Nothing gets done until you approve a flat-rate price.

456 Google Reviews

Your Peace of Mind

Flexible Options

We're Here Anytime

Guaranteed
Need Furnace Repair in Wayne?
From Dunham Woods to Wayne Meadows, our Streamwood shop is about 18 minutes away via IL-59.
- $75 diagnostic ($99 evenings, weekends & holidays)
- 24/7 emergency service, with same-day appointments available
- Trucks stocked with common furnace parts, so most repairs are done in one visit
- Upfront, flat-rate pricing before any work starts
Time for a New Furnace in Wayne?
Was your original furnace oversized? A Lennox Premier Dealer offers free in-home estimates and sizes each Wayne system to its area.
- Good, Better and Best options with upfront pricing
- Nicor Gas rebates applied where you qualify
- Financing available, including 0% APR on select Lennox systems during Lennox promotions
- Sized with a load calculation, installed and permitted
Quick Summary
Pure Comfort Heating and Cooling repairs furnaces in Wayne, IL (60184) from our shop in Streamwood, about 18 minutes away. The diagnostic is $75 ($99 evenings, weekends and holidays), most furnace repairs cost $100 to $700, and you approve a flat-rate price before any work starts. Phones are answered 24/7, same-day service is common, and stocked trucks finish most repairs in one visit. Call (708) 515-4822.
Reviewed by Gene Baldassano, owner and NATE- and EPA 608-certified HVAC technician since 2008 · Updated
Furnace Not Working? Common Furnace Problems in Wayne Homes
Most Wayne homes are large custom houses on one to three acre lots, built from the 1970s through the 2000s, and many run two or three furnaces for the main floor, bedroom wings and finished basements. Original high-efficiency furnaces from the 1990s and 2000s are now at the age when inducer motors, pressure switches, igniters and control boards fail. A furnace in an attic or over a garage that serves a bonus room works harder than the basement unit and tends to need repairs sooner. Long PVC vent runs on big homes can also collect condensate or ice, which shuts the furnace off on its pressure switch during a cold snap.
How a Wayne Furnace Repair Visit Works
In a Wayne home, the first job is finding which furnace is struggling. The attic or over-garage unit serving a bonus room works harder than the one in the basement, and it often needs help sooner. Long PVC vent runs get a close look, because condensate or ice inside them can shut a furnace down on its pressure switch in a cold snap. From there, our method holds steady. We follow the heating sequence from the thermostat call through ignition. Then we check the safeties, electrical parts, venting, drainage and airflow. Parts are measured before anything is replaced. You hear the cause and a flat-rate price before work begins. Our trucks carry the common furnace parts, so most furnaces are fixed on the first visit. We repair all major brands, including furnaces from other installers. For most brands we handle the manufacturer parts warranty claim, so you pay labor only.
Repair or Replace Your Wayne Furnace?
About 70 percent of Wayne homes were built between 1970 and 2009, and the original high-efficiency furnaces from the 1990s and 2000s are now at the age when major parts fail. A well-maintained gas furnace lasts about 15 to 20 years in the Chicago area. Apply the $5,000 rule to each furnace on its own. Multiply that unit’s age by the repair price. Under $5,000, repair usually makes sense. Over $5,000, get a replacement price too. A cracked heat exchanger is a safety issue at any age. A free in-home estimate can cover every system you want priced. Nicor Gas rebates apply to qualifying high-efficiency furnaces, and financing is available, including 0% APR on select Lennox systems during Lennox promotions.
Heating Services in Wayne
Related services for Wayne homeowners.
Wayne Furnace Repair Cost and Timing
In Wayne, most furnace repairs cost $100 to $700, with about $300 the average. Igniters, flame sensors and pressure switches sit at the low end. Inducer motors, control boards and blower motors cost more, and they are common on the 1990s and 2000s originals. If two furnaces need work, each one is priced separately. You approve a written, flat-rate price before work starts.
| Job | Typical window | What changes the number |
|---|---|---|
| Diagnosis | Same day when a truck is open | Scheduling and after-hours demand |
| Furnace repair | Often same day | Smaller parts versus major safety or heat-exchanger work |
| AC repair | Same day to 48 hours | Electrical work versus sealed-system repair |
| Furnace or AC replacement | 1 to 2 install days after equipment arrives | Return-air work, two-story airflow, condenser placement, and installation access |
| Mini split or tankless | Site-specific | Electrical, gas, venting and installation location |
| Tune-up | 60 to 90 minutes | System age, condition and last service |
Diagnosis
Typical window
Same day when a truck is open
What changes it
Furnace repair
Typical window
Often same day
What changes it
AC repair
Typical window
Same day to 48 hours
What changes it
Furnace or AC replacement
Typical window
1 to 2 install days after equipment arrives
What changes it
Mini split or tankless
Typical window
Site-specific
What changes it
Tune-up
Typical window
60 to 90 minutes
What changes it
Why Wayne Homeowners Choose Pure Comfort
Wayne’s custom homes often split heat across two or three furnaces and long duct runs, so we test every system that touches the cold room.
Local and family-owned
Founded in Streamwood in 2008 and still owned and operated by the family who started it.
In-house technicians
Service and installation completed by our own crews, never subcontracted to another company.
Certified and insured
NATE and EPA Section 608 certified, fully licensed and insured for the work we carry out.
Lennox Premier Dealer
Premier Dealer standing, with service and repair covering all major HVAC makes and models.
In Wayne, replacement planning sizes each furnace to the area it serves, since many 1980s and 1990s systems were oversized, and accounts for long duct runs and access in attics and large basements. Where a permit is required, we confirm the current Wayne requirements and pull the permit, or help you file it in towns where the homeowner applies, then schedule any required inspection.
Not Sure Whether to Repair or Replace?
Bonus room cold while the rest of the house is fine? Furnace shutting down every cold snap? We will find which system is at fault in your Wayne home and explain your options.
Feedback From Homeowners We Serve
With two or three furnaces in one Wayne home, you want a contractor who explains each one clearly. Read our Google reviews to see what customers say about our communication and workmanship.
What Wayne homeowners say
“I called when we had no heat in our back room due to the furnace not turning on. The lady on the phone was very accommodating on getting a service tech out right away. The tech gave me a courtesy call to let me know he was on the way! Although I didn’t catch his name he was super friendly and resolved my issue quick with a part he even had in stock on his truck! I would highly recommend!”
No-heat furnace repair
“Sal is very good at servicing my central air unit. He is highly skilled at his work. He is reliable, professional, on time, honest about the job. The cost to service my HVAC system was always a fair price. If some one needs a good HVAC man, then call Sal I highly recommend him.”
AC service
When you need HVAC due to an unexpected event you want someone who not only can provide the service you need….
Great service. Very professional. They try all avenues to resolve issues with equipment. Always a pleasure to work….
Had an issue with the thermostat reading erroneously, as soon as I contacted Pure Comfort, they got back….
Our serviceman, Gene, was very responsive, professional and thorough. He explained each aspect of the issue clearly and….
I called them at 7am with no heat, the only available spot they had was in the afternoon, 5 minutes later they called….
Gene was professional, on-time, very friendly and did a thorough job inspecting our A/C unit. He also checked….
Quick and honest service and advice last minute on a Sunday. Clean crew and equipment. Gene was a knowledgeable….
Gene did not give up on the problem. It was a crazy situation but he never gave up found the problem and fixed it. Thank you….
Furnace wasnt working. Called Pure Comfort after hours and they came right out and helped me. The furnace….
Very professional, definitely knowledgeable had the furnace fixed in 10 minutes. I can honestly say I trusted Gene….
Furnace Repair Near Wayne
Pure Comfort repairs furnaces throughout Wayne and the towns around it, including furnace repair in Bartlett, furnace repair in St. Charles and furnace repair in West Chicago.
Drive time: our shop in Streamwood is about 9 miles from Wayne, roughly 18 minutes away via IL-59 in normal traffic.
Zip codes: we cover Wayne homes in 60184.
Furnace repair in nearby towns
- South ElginFurnace repair
- BartlettFurnace repair
- St. CharlesFurnace repair
- West ChicagoFurnace repair
- Hanover ParkFurnace repair
Near Wayne but not listed? We serve towns within about 20 miles of Streamwood. See all service areas or call (708) 515-4822.
Wayne Furnace Repair FAQs
How much does furnace repair cost in Wayne?
The diagnostic is $75, or $99 evenings, weekends and holidays. Most furnace repairs cost $100 to $700, and about $300 is typical. You approve a flat-rate price before any work starts.
How fast can you get to Wayne?
Our Streamwood shop is about 9 miles from Wayne, roughly 18 minutes via IL-59 in normal traffic. We answer 24/7 and offer same-day furnace repair when a truck is open.
We have two furnaces and only one stopped. Why?
Each furnace has its own controls, venting and condensate drain, so one can fail while the other keeps running. The most common causes are a frozen condensate line, a blocked intake or exhaust pipe, or a failed igniter or pressure switch on the furnace that stopped. We repair that system and look over the other one while we are there.
Should I repair a 20-year-old furnace?
Use the $5,000 rule: multiply the furnace’s age by the repair price. Under $5,000, repairing usually makes sense. Over $5,000, it is worth getting a replacement price too. A cracked heat exchanger usually means replacement.
Why does my furnace start, then shut off after a few minutes?
Short cycling is often a dirty flame sensor, a pressure switch fault from a blocked vent or condensate trap, or overheating from poor airflow. We test each one before quoting a repair.
Do you repair furnace brands other than Lennox?
Yes. Pure Comfort is a Lennox Premier Dealer, but we repair all major furnace brands in Wayne, including furnaces installed by other companies.
What is the $5,000 rule for furnace repair?
Multiply the age of the furnace by the repair price. If the total is more than $5,000, replacing usually makes more sense than repairing. For example, a $350 repair on a 16-year-old furnace comes to $5,600. It is a rule of thumb, not a hard cutoff, so we give you both options in writing.
Schedule Furnace Repair in Wayne
Call any hour or book online for service anywhere in Wayne’s 60184 ZIP, from the historic village center on Army Trail Road to the large-lot subdivisions.
- You get a scheduled window and the technician's name
- We diagnose and price the work before anything starts
- Replacement estimates are free, with no obligation
Call rather than using the form: (708) 515-4822. Forms are checked during business hours, so a phone call gets you a faster answer.





