HVAC Contractor | Furnace Repair Service

Gas Furnace Repair Service

Gas Furnace Repair Service

Whether you are looking for a repair service or a complete replacement, you need to know a few basic things about gas furnaces. Some of the most common problems include dirty air filters, sizing issues and malfunctions.

Dirty air filters are the number one cause of furnace problems

Keeping your furnace clean and well-maintained will help keep you warm. Having a clean filter will also increase the lifespan of your HVAC system.

A dirty air filter can cause several issues with your HVAC system. It can prevent your furnace from producing enough heat, increase your energy bills, and affect the quality of your indoor air. These issues can also lead to health problems.

Your furnace needs to circulate fresh air throughout your home to produce the heat you want. When your air filter becomes clogged, it prevents the air from flowing. This puts stress on your furnace and may even damage your blower fan.

Flame sensor safeguards your furnace against the unsafe burning of fuel

Having a flame sensor in your gas furnace is an important safety feature that protects your family and valuables from the unsafe burning of fuel. However, it can become faulty, which can result in gas explosions or carbon monoxide poisoning.

The best way to find out if you have a faulty flame sensor is to test your furnace. If it is operating properly, you may not need to replace it. But if it is shutting off the heating system prematurely, you could have a problem with your flame sensor.

To inspect your flame sensor, you need to take the power off and disconnect the wiring from the sensor. Then, you can remove the flame sensor from the burner assembly. After that, you can clean the flame sensor. This can be done by using a lint-free cloth.

Turns on and off too quickly

During the winter, your gas furnace will likely turn on and off too quickly. This problem is known as short cycling and is something that you will want to address ASAP.

Short cycling can occur for a number of reasons. A dirty flame sensor is one of the most common culprits. This device will shut off the furnace’s gas supply if it can’t detect a flame. This is a safety feature that will prevent your family from breathing in dangerous carbon monoxide.

Another culprit is a dirty air filter. You might also notice that your vents are closed when you’re not in the room. This is a result of an obstruction such as animal debris or a bird clogging up the vent pipe. The most common fix for this is to replace the filter.

Squealing noises

Usually, squealing and screeching sounds are caused by blower motor bearings. These are the components that spin rapidly to help relieve the pressure from the furnace. If these bearings are worn out, they are not able to spin efficiently. In addition, they can cause the furnace to overheat. A professional HVAC technician can fix these problems.

Another furnace repair service option is to replace the fan belt. This may be a DIY project, but it is best to call an experienced professional. This is because replacing the fan belt involves removing the motor mount and moving it back far enough to make the belt taut.

If the fan is making a loud humming or buzzing sound, this may be due to a damaged or blocked air filter. An electrical problem can also cause this noise.

Sizing issues

Purchasing a furnace that’s too big for your house may have some unpleasant surprises. It may require more repairs, cost more money to operate, and have a shorter lifespan than a unit of comparable size. It also has the potential to put you at risk of health issues, including a fire hazard, carbon monoxide poisoning, and allergies.

If you are thinking of purchasing a new unit, it’s a good idea to consult a certified professional for a bid. If you decide to go it alone, you could find yourself stuck with a gas leak, an unsafe unit, and a lot of unanswered questions.

For a start, you need to figure out the proper BTU size for your home. Using the right furnace can mean the difference between having your home warm and comfortable, and having to pay for costly repairs.

Do-it-yourself repairs

Whether your furnace is old or new, there are some common do-it-yourself repairs you can do yourself. However, it is important to remember that some repairs are not covered by homeowners’ insurance. If you do not perform these repairs properly, you could damage your furnace or cause more problems.

One of the most basic do-it-yourself repairs you can make is to replace your air filter. If you have a clean filter, your furnace will run more efficiently. You can also change your thermostat settings. If you notice that your home is not heating up at the same temperature, this may indicate a problem with your thermostat.

Furnace Installation Service

Why It’s Important to Hire a Qualified Gas Furnace Installation Service

New Gas Furnace Installation service

Whether you have decided to purchase a new gas furnace, or you just need a new gas line installed, it’s important to hire a professional contractor. A poorly performed installation can lead to a variety of problems.

Cost to install a new gas furnace in a 1500 square foot house

Investing in a new gas furnace can be an expensive proposition. It can cost between $2,000 and $11,000, depending on your location and the type of unit you choose. However, there are a few things you can do to make sure you get the most out of your investment.

A good starter point is to make sure you know which brand you are considering. Some brands are targeted at smaller homes, while others are meant for larger houses. It can be helpful to know if your contractor has a great reputation for his or her work. Ask about warranty options.

For a standard-efficiency gas furnace, you can expect to pay between $1,400 and $2,300. A high-efficiency model can cost more, but it will save you money in the long run. Moreover, a higher-efficiency model will help you control heating costs in the most extreme winters.

Cost of hiring a quality contractor

Whether you are installing a new furnace or upgrading an existing unit, it is important to hire a qualified, reputable contractor. There are several factors that can affect the cost of hiring a quality contractor.

The size of your home is one factor. A larger home will require a bigger furnace. Cathedral ceilings or drafty windows will also increase your BTU requirements. In addition, you may need a higher efficiency model. A furnace with an 80% efficiency rating will be adequate for most climates.

The furnace should be installed by a licensed, insured HVAC contractor. A high-quality installation will lower your carbon monoxide poisoning risk.

A premium brand furnace will cost more than a basic or mid-level model. These models are designed for greater reliability and name recognition. These higher-end furnaces have higher-quality construction and features.

AFUE rating for a new gas furnace

AFUE is the acronym for Annual Fuel Utilization Efficiency, and it’s a measurement of the efficiency of your new gas furnace. A high AFUE rating means more heat is converted into useful energy, thus cutting down on your utility bills.

The AFUE rating is based on the total energy input and output for the heating season. A high AFUE rating will result in a higher heat output, and lower operating costs over the lifetime of the system.

While the AFUE rating is not the only way to judge the efficiency of a heating system, it does provide a handy reference point for consumers. The AFUE is measured in percentages, and can be found on a yellow Energy Guide label.

Propane vs natural gas furnaces

Choosing between propane and natural gas furnaces can be a difficult decision. Both of these options are energy-efficient, clean burning, and environmentally friendly. However, they differ in a few important ways.

For starters, natural gas is a liquid, whereas propane is a liquefied petroleum gas. Also, propane is a lot more expensive than natural gas. The cost of a tank for a propane furnace is twice as expensive as a tank for a natural gas furnace. The cost of fuel is the first thing you should consider when comparing these two.

The other important factor to keep in mind is that propane has a higher energy content. This means that it generates more heat per unit than natural gas. This is important because it can make a big difference when appliances are running.

Properly calibrated furnaces reduce the chance of gas leaks and electrical problems

Getting a professional furnace repairman to fix your problem is a better idea than trying to repair it yourself. Inexperienced homeowners often end up making bigger problems.

Typically, a gas leak has a few warning signs. These include a hissing sound, a strong smell of natural gas, and a dust or white cloud that appears to have formed near the gas line. If you’ve detected any of these, you should immediately evacuate the building and call the fire department or your local emergency services.

A gas leak has the potential to harm you and your family. For instance, carbon monoxide, which is very toxic, can cause respiratory problems, including nausea, headaches, and chest pain.

Properly calibrated furnaces mitigate the drying of heated air

Optimal furnace design involves consideration of several factors, including material charge, temperature and oxygen requirements. A properly designed and maintained system should be able to provide an adequate heat release rate, while at the same time mitigate the drying of heated air. Although not all of the components involved are equal, the resulting conditions can be adjusted to suit the needs of a particular application.

The primary chamber can be configured to operate in either a starved or excess air mode. The latter option allows for the best use of the furnace’s secondary afterburner chamber. The main advantage of this configuration is that the flue gas is recirculated with relatively cool flue gas, diluting the flame’s oxygen concentration. The process also lowers nitrogen oxide formation.

Furnace Maintenance | Furnace Tune up

Benefits of Furnace Maintenance | Tune Up

Furnace Maintenance Tune up

Performing furnace maintenance at least twice a year can help your unit last longer and save you money. While the system is running, the technician will perform a series of tests and checks to ensure that everything is working properly. If there is a problem, the technician will make the necessary repairs. They will clean the blower and air filter and check for connections, gas burners, and other common problems.

One of the main benefits of furnace maintenance is that it can prevent larger problems. A furnace that isn’t inspected and serviced regularly will have more frequent breakdowns, which can be expensive. Additionally, a broken heating element can cause other components to break, making it even more costly to fix.

A furnace’s air filters are important in that they reduce the amount of allergens and other airborne particles in your home. They also help to keep indoor air quality high. But, they can also become clogged and affect the furnace’s efficiency. A regular tune-up can get rid of clogged drain lines and other issues that can cause your furnace to work harder than it needs to.

A well-maintained furnace will also make sure that you don’t have any unexpected spikes in your energy bill. In fact, a tune-up may be able to save you as much as 30% on your energy bill. When a furnace has been inspected and serviced, it will use less electricity and run at a higher efficiency.

Performing furnace maintenance is also beneficial for older units. During the cold winter months, they can become inefficient, making them work harder to maintain the temperature. In addition, a weak heating system can lead to pipes freezing. These problems are especially dangerous when the temperature drops below freezing.

A furnace’s motor is an important part of the system and will wear out over time. When the motor is moving at a faster rate, it can wear out prematurely and cause the system to overheat. The system may also need to be replaced, depending on the age of the unit.

A tune-up may also be recommended if you notice unusual noises coming from your furnace. When a furnace is operating properly, it doesn’t have any major problems. However, if it begins to malfunction, the technician can perform minor repairs to fix the problem before it grows into a bigger issue.

An annual furnace maintenance tune-up can prevent problems before they start. This way, you won’t have to pay for expensive repair bills in the middle of winter. In addition, you’ll have a better idea of how long your furnace will last. The manufacturer usually recommends that you have your furnace inspected once a year, although it is possible to have it maintained more often.

When your furnace isn’t performing as it should, it can be extremely uncomfortable. In addition, the heating system can become hazardous when it breaks down in the middle of a cold winter. During a breakdown, your pipes can freeze and your indoor climate can be very uncomfortable. The last thing you want is to have to replace your heating system before the holidays. Luckily, there are companies that will perform furnace maintenance during the summer and winter months.

Heating contractor

Best Heating Contractor In Streamwood

Bitter cold and wet snowfalls in illinois are constant reminders that winter can be brutal. At the end of a long workday, you want nothing more than to return home to a warm, cozy, happy place, sheltered from the bitterly cold temperatures outside. 

Fortunately, your friendly technicians at Pure Comfort Heating and Air Conditioning provide a number of heating contractor services that can provide you with those cozy solutions for your home.

You have come to the right place if you want the best heating experts in the country. Pure Comfort heating and air conditioning is dedicated to providing top-quality heating repair, installation, and maintenance service while maintaining a respectful attitude toward you and your home. With our services, we promise that you will either be satisfied with the results or we will correct it for free.


Furnace not working? Need a furnace repair? Give us a call and our highly trained technicians will do a thorough evaluation of your heating and cooling system and give you an exact “to the penny” price for your furnace repair before moving forward. 

Whether your furnace or heat pump is making strange noises or won’t turn on, our team of NATE-certified furnace technicians from Pure Comfort is always here to figure out just what’s going on. With our skills and experience, we can diagnose the root cause of any heating issue in your home. We’ll explain all your repair options and provide you with an “exact to the penny” pricing to review and walk you through your options in a friendly and professional manner. 


All About Streamwood IL

All About Streamwood IL

Streamwood is a suburb of Chicago located in the northern part of Illinois. Its population is over 39,000 and the median home price is $244,300. It’s the type of city that offers a wide range of housing styles from ranch to luxury.

The Streamwood Oaks Golf Course opened in 1990. It’s also the site of the annual Streamwood Stride endurance race. During the twilight of the century, Streamwood was a bustling town, populated by young professionals who commuted to work in Chicago, and those who lived here to enjoy the great outdoors.

Streamwood’s population has been on the decline for the past five years. It has lost 4,486 residents in that time period, a drop of 2.6%. The reasons behind this drop are numerous, from short-term events to long-term demographic patterns. However, the most common cause of decline is the lack of demand for basic services, such as healthcare and education. For example, the number of households in Streamwood requiring Medicaid declined by 7.8% between 2010 and 2014.

The Streamwood Oaks Golf Course was the best public golf facility in the state of Illinois. The most impressive thing about the facility is its design, which incorporates a modernized golf course with a historic twist. The course was designed by renowned architect Louis Lohmann, who also designed the golf course at Oakmont in nearby Oakmont, IL.

The Streamwood Oaks golf course was a surprisingly large undertaking. It took a team of architects and designers about a decade to complete the project. The Oakmont area is known for its championship golf courses, and the Oaks is considered the top public course in the region.

The Streamwood Stride, a 10k run in the town, is a fun event. There are also a double derby, a 5k, and a kiddie race. The Streamwood Wooden Box Museum, a restored railroad car that holds exhibits on railroad history, is a popular destination. It’s worth checking out if you have a few hours to spare.

The Gail Borden Public Library District, which serves the town, is a well-regarded organization. The Streamwood Parks and Recreation Department are another good resource. The Streamwood Oaks Golf Course is the largest municipally owned golf course in Illinois, with six courses in total.

The Streamwood Museum, located at the village hall, features some great art. The Streamwood County Fair, which is held every October, is a favorite of locals. Other attractions include the Gail Borden Water Museum, which boasts the world’s largest model train display. Streamwood consists of 6 square miles, so there is a lot to see and do.

Streamwood was once a farming community, and a stagecoach line ran along Lake Street. In the heyday of the farm, a number of German immigrants worked the land now known as Streamwood. This was a time when the Streamwood town was a center of commerce, and there were plenty of shops and taverns along Lake Street. Today, the village is a mix of old and new, with a retail sector that has grown in recent years at the intersection of Illinois Route 59 and Illinois Route 19. The Streamwood townhouse was built in 1890, and the Village Hall, which is the oldest structure in Streamwood, is still in use.

Our Address

Address :

Pure Comfort Heating and Air Conditioning
39 Harrison Ln, Streamwood, IL 60107, United States

Drop a message